How to refill ink in Lexmark printer?

by Lucinda Vogt Lexmark Printer Support Canada

If your printer has printed missing lines or broken shading that means your device needs ink, just like us we need food for doing any work. Here is a procedure that how to refill your printer at that time. Never print the cartridges when it is completely empty, refill small amounts of ink from time to time. You should clean your printer once a week.

The procedure of refill your printer

Remove container label. Locate the refill holes in the middle of the container
Connect needle to syringe and load syringe with ink
Use a toothpick to jab inside an opening, Embed needle into amending cartridge ink opening
Slowly inject the ink into the container. Stop if the ink begins to well up from the fill hole. Don’t overfill
Clean off top of a container
Repeat steps until all colors have been filled. Place scotch tape over the highest point of the cartridge so it covers each gap. Utilize a stick and put a little gap through the scotch tape for each gap on the highest point of the cartridge
Clean off the cartridge. Re-insert the cartridge into a printer
Reinstall in a printer and run maybe a couple cleaning cycles until the point when the cartridge starts to print accurately. Try not to surpass three cleaning cycles

Resetting the filing level indicator is unfortunately not possible with this type of cartridges. Some of the newer Lexmark cartridges have very small holes and the needle will not fit into it. In that case, just use the thumb drill provided and drill the hole larger. If there occurs any problem or you feel that you need guidance then contact us at Lexmark Printer Helpline Number Canada: 1-855-264-9333 our expert will defiantly help you.

Related Keyword: