How to make yourself the lining of a beach wedding dress

Just because that little black dress wedding dresses from china(http://www.weddingdresstrend.com/en/wedding-dresses ) has no lining, does not mean you should not buy it when discounted. To maintain a good margin the clothing manufacturers usually eliminate non-essential features like liner, or not functional details. The resulting dress can be transparent or rough, but with basic sewing skills and materials, you can sew a lining inside the sleeveless dress with zipper in the back.

Instructions

1.Vire the wrong dress. Fold and pin the entire central fold to the bar. Equal and secure the front collar, shoulder seam and openings of the sleeves, side seams and curved areas forming a shape of half a dress form the template for the liner model.

2.Dobre the paper in half to create a DC. Mark a short line at an angle of 20 cm below the top of the paper. Place the DC collar this brand and position the length of the front of the dress along the fold line. Smooth the fabric in the side seam and attach the entire piece with weights to mold. Carefully draw the line around the perimeter of this section. Remove the weights and the dress. Repeat for the back of the dress white and black wedding dresses(http://www.weddingdresstrend.com/en/Mostpopular-Black-And-White-Wedding-Dresses.html ) on another piece of paper, but the rear center line represent a seam and need not be doubled.

3. Place the transparent strip on the DC line and draw a line at right angles about 1.25 cm away from DC. Draw a similar line in the lower end DC. Place a ruler on the shoulder line, side seam and marked bar line and draw on the original lines. At the point of pursuing, measure and mark 1.9 cm from the seam. Measure and mark 5 cm below and above the curve line. Use the French ruler to draw a smooth arc by brands. Re-check the curves of the opening of commandest with French rule. Repeat the process for the back mold piece. These are the new lines of stitching.

4.Adicione 1.25 cm seam allowance on the collar, opening to the arm and side seams. Draw a seam allowance of 2.5 cm on CT and mark the spot where the zipper ends. Note the size of seam allowance dress and let 1.25 cm less in the lining. However, check the bar bending line 5 cm above the rim. Cut the piece of the front mold and place it on top of the back mold. Attach the shoulder and side seams. Compare the two parts and make changes on the back to ensure that the length of the seams and bars are the same. Cut the mold back.

5. Attach the mold and cutting the tissue a front piece and two-piece back. With right sides together, use a large line of stitch to sew the seam of the TC to the end of the zipper. Return the point size on the machine for medium and continue sewing the remaining seam. Pass the margin seam open.

6.Na side seam of the front, make a long point at the edge of 10 cm curve. Join slightly. Gift and sew the parts of the front and back together at the sides and shoulder. Pass open margins. Sew the seam lines of the collar and the openings for the sleeves. Cut the tissue lining the curved areas being careful not to cut the seams. Spend face sewing margins into the lining in the line of points. Pass the edge of the bar to 5 cm above to form a hard crease which will be 1.25 cm above the hem of her dress.

7.Posicione lining on averse sides together. Align the seams of TC, shoulders and sides. Present as necessary to stabilize the liner. Sew hand the collar layers and openings for the sleeves using a very low point. CT, remove the basting stitches of the zipper area. Place the dress on a hanger inside out. Set the liner and hit all the side seams. Gift and then baste lining bar in dress bar to 1.25 cm above the hem of her dress line.

8.Retire the hanger dress, and by opening the TC, reach the bar area. Working with a small piece at a time, hold and hand sew the lining of the bar at the hem of her dress. When the bars are attached, reposition the dress on a hanger and hold the liner in the dress around the zipper area and sew the liner in place using a buttonhole or crossover point. Pass the dress and the lining.

Tips & Warnings

Buy fabric with strong frames to the liner for easy handling. Also choose fabrics with washing handling similar to the dress 8th grade prom dresses(http://www.weddingdresstrend.com/en/graduation-dresses ) fabric. Use a liner with enough contrast to create a visual highlighted.

The liners may not be accurate if you mark directly on the fabric instead of a mold. Keep tools and sewing materials out of the reach of small children and animals.