How to Install Ricoh Printer Drivers Without CDs?

You have a new Ricoh printer and you’re excited to start using it. However, when you open the box and begin reading through the instruction manual, you realise that there is no CD included for the drivers. This can be frustrating, but don’t worry - we’ll show you how to install Ricoh printer drivers without CDs in this article.

Install Ricoh Printer Driver

It is quite easy to install Ricoh printer drivers without a CD. All you need is a computer with an internet connection and you can download the drivers from Ricoh’s website.

First, go to Ricoh’s website and select your printer model. Next, under the “Downloads” tab, select the operating system that your computer is using. Finally, select the “Driver” option and click “Download”.

Once the download is complete, open the file and follow the on-screen instructions to install the driver. After the installation is complete, restart your computer and you should be able to use your printer.

Setup Ricoh Printer in This Way

If you want to install your Ricoh printer without using a CD, then you can follow the below-mentioned steps. This process is pretty simple and easy to follow. So, let's get started:

First of all, you need to connect your Ricoh printer to the computer. Make sure that the printer is properly plugged in and turned on.

Now, open the Control Panel on your computer and go to the Devices and Printers section.

In the Devices and Printers section, you will see your Ricoh printer listed there. Right-click on it and select the option that says "Add a printer".

Now, you will be asked how you want to install your printer. Select the option that says "Add a local printer".

On the next screen, you will be asked to select the port where your printer is connected. Select the correct port from the list and click on Next.

Now, you will be asked to select the driver for your printer. Since you don't have the CD with you, select the option that says "Do not have a CD" or "I don't have a CD".

After that, Windows will search for the drivers online and install

Steps to Install Ricoh Printer Drivers Without CD

1. If you don't have the Ricoh printer drivers CD, don't worry. You can still install the drivers without it. Here's how:

2. Go to Ricoh's website and download the drivers for your specific model of printer.

3. Once the drivers are downloaded, open the folder and double-click on the installer file.

4. Follow the prompts to install the drivers on your computer.

5. Once the installation is complete, restart your computer and then try to print something to see if the drivers are working properly.

I'm hoping that after following the steps above, you'll be able to install Ricoh Printer Drivers Without CD. Send us a message if you require any extra assistance. For more assistance visit the official website for kyocera printer support.