How to Install Ram Memory in Your Acer Laptop

RAM or Random Access Memory is one of the most integral parts of the laptop, especially if you want to speed it up and boost its performance. Adding RAM also increases the efficiency of your laptop while ensuring you with more storage capacity and restricting it from frequent hanging.

Also considered as one of the easiest and the quickest ways to enhance the performance, it has become a necessary requirement, especially if you are a user of Acer laptop and facing issues like slowdown of system, memory full and many more. So, in that case, you can seek help from the experts by calling up at Acer customer service number. However, before consulting the experts, you can give a first try by yourself by following the below mentioned steps.

• At first you need to unplug your laptop from the AC power source and remove the battery. Later, you need to make sure that you have protected your system from static electricity by grounding yourself with an ESD wrist strap or through another grounding method.
• Now in the next step, you need to locate the memory access door for the main memory module. While you are locating the memory access door, users are supposed to keep in mind that it is mostly present on the back side of the computer.
• After you are done with the previous steps, one must unscrew the memory access door so that it can be removed easily. Also while you move further, make sure that you have removed the RAM module by applying gentle outward pressure to the securing clips on either side of the RAM module until they release.
• Also, at the same time users are supposed to rotate the RAM module upward to a 45 degree angle and slide it out of the slot. You also need to ensure that the alignment of the new RAM module with the tab is perfect in the connector slot. If you are done with the previous step, slide it firmly into place and gently rotate it downward until it clicks into place and then replace the memory access door.
• After you are done with replacing the memory access door, now you need to replace the battery and power up the computer. It should recognize the added memory and reconfigure itself for use.

Although the steps mentioned above are quite easy and practicable, there might be some users who find it difficult and so they get stuck in the middle of the process, If you are one of them, don’t worry, as you can resolve this problem of yours by getting in touch with experts on Acer service number.

Article Source: http://goo.gl/uw1p06