How To Correctly Change Brother Toner Cartridges In Your Printer?

Replacing the toner cartridges in a printer by yourself does seems like a complicated process. But the steps and process is fairly simple and easy to follow. You can complete the task without any assistance. Brother printers are user friendly and comes with fairly detailed instructions manual on how to carry out these tasks by yourself. Here, we will have a look at the detailed process and steps including of how to change toner in Brother printer. The steps may differ a little bit depending on the model of Brother printer you are using but the basic procedure remains the same.

There are two parts, toner cartridges and drum unit which work together to produce a print. The toner cartridge is the section which contains the powder or ink required to print. The drum unit is the electrically charged part of the device which converts the ink to the paper. They both are required to be installed and work together to print anything. It’s not permanent supply which printer produces itself therefore you need to change it when it is empty.

Most of the times you will receive an alert text saying that it is time to change the toner cartridges of your printer. You should not ignore the alert text and move on to replace the toner cartridges immediately. If your printer is out of ink or toner, it might affect the working if a printer and hence resulting in some damage.

Before we move on to replacing the toner cartridges. Let’s have a look on how to prepare it for the process briefly. Take out the new cartridges out of the box. Remove the packing carefully. There is a orange colour clip at the bottom for protection. Remove the clip. There can be a little powder dust there you can take it over the trash can or place an old cloth beneath itit and slowly remove the tape. The tape would easily come out in one and you have your cartridge ready to be installed.

Now that your printer is ready, let’s have a look at the steps on how to replace toner in Brother printer. Follow the steps mentioned below.

Steps to replace toner:

·        Switch on your Brother printer and open the front cover lid.

·        Now, remove the old toner cartridges and drum unit from their respective slots.

·        Slowly push the green lock lever which must be on the side of the cartridges.

·        Then, take the new cartridges which as we discussed earlier is ready to be installed.

·        Slide the new toner in the spot and you will hear a click sound when it is adjusted properly.

·        Install the complete unit.

·        Cover the lid carefully, if everything is installed in it’s place the cover will slide smoothly.

As mentioned above the process is quite simple, you just need to be careful while doing it. Make sure your hands are clean and dry while you’re replacing the toner cartridges. Wear the gloves if required. There is a specific slot for each part in the printer and it is necessary that the new cartridges are placed in the same ones. Always print out a test print to ensure printer is running smoothly.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 12th 2022 06:12. Viewed 236 times.

Share on APSense

Comments