How to Connect Canon Pixma mg2922 Printer to WiFi

The Canon Pixma mg2922 is a versatile and affordable printer that is perfect for a home office or small business. One of the best features of this printer is its ability to connect to WiFi, which allows you to print from any device in your home or office. 

In this article, we will show you how to connect your Canon Pixma mg2922 printer to WiFi in just a few simple steps. By the end of this article, you will be able to print wirelessly from your computer, phone, or tablet without having to worry about cables or drivers.

Canon Printer WIfi Connect

If you have a Canon Pixma mg printer and you want to connect it to your WiFi network, there are a few things you need to know. First, make sure that your router is compatible with the printer. Most routers these days are 802.11n or better, which should work fine. If you're not sure, check the manual or the website for your router.

Next, you'll need to find the WPS button on your router. This stands for WiFi Protected Setup and it's usually on the back or bottom of your router. Once you've found the button, press and hold it for about two seconds. This will activate the WPS mode on your router and allow you to connect your printer.

Now, open up the settings on your printer and look for the WiFi connection option. Select it and then enter the SSID (name) of your WiFi network. Once you've entered the SSID, select the type of security from the drop-down menu (most likely WPA2-PSK) and then enter the password for your network. Now just hit OK and wait a few moments for the printer to connect to your network.

Step to connect canon pixma mg2922 printer to wifi

Assuming you have a wireless router set up and working, the process of connecting your Canon Pixma mg2922 printer to WiFi is quite simple. Here are the steps:

• On the printer's control panel, press and hold the WiFi button for 5 seconds.

• Use the arrow keys to select your WiFi network from the list of available networks, then press the OK button.

• Enter your password using the keypad, then press OK.

• Your printer should now be connected to your WiFi network!

Canon Printer Connect to Desktop

Assuming you have a desktop with WiFi capabilities, you can connect your Canon Pixma mg printer to it without much trouble. Here's what you need to do:

1. Make sure the printer is turned on and in range of the desktop's WiFi signal.

2. On the desktop, open the WiFi settings and find the Canon printer in the list of available devices.

3. Select the printer and enter the password if prompted. The connection should now be established.

4. Open the printing software on the desktop and select the newly connected printer as the default device. You should now be able to print wirelessly from your Canon Pixma mg printer!