How to Change the Apple iMac Hard Drive Carefully?

by Charley Bang Online Technical Support Services

Apple iMac is a costly but very useful computing electronic device can be used for a long period. But after certain period its internal parts such as battery and hard drives need to replace timely to ignore any serious technical issue. Varying or replacing Apple iMac hard drive not a simple task, it needs extra precautions with the right instructions applied with the help of apple support experts.

Before you begin the hard drive replacement procedure, you need some necessary tools such as a suction cup, canned air and screw driver tool kit. The whole procedure is done with assistance of these tools and right technical steps given below, so you need to follow every step carefully to get new hard drive in your device.

Step1:- The screen glass of apple iMac is seized with magnets that can be removed with the help of suction cups to pull the glass out securely. After removing the glass, eliminate door on the bottom of the device. You should be careful while eliminating the screen glass and memory of the iMac. If you need any help, you can call at toll free iMac Technical Support Phone Number 1-800-834-1377 for instant assistance.     

Step2:- Torx screws should be removed which are holding the metal case of IMac. You need to pull the metal case lightly beginning from the top and also disable a connection called iSight and after removing, you can remove the metal case from the monitor. 

Step3:-After taking away metal case, you should eliminate the screws on both sides of the LCD screen.  You need to wobble LCD screen from the top to onwards and you can see the hard drive behind the monitor. Before you remove screen, you need to disconnect the wires powering the LCD screen.

Step4:- Pull the plastic bar connected back on the left side and after that eliminate the heat sensor by pulling off safely.  After eliminating the fizz keep it aside to reattach with new hard drive.

Step5:- Finally, the hard driver of your device is ready to come out by shivering the upper out of the frame box and pulling it up. When your drive comes out, you can use the Torx screws on the new drive. One important thing more make sure that new drive you taken must be compatible and match with the model of your device. If you need any assistance, you must call at toll free iMac Technical Support Number 1-800-834-1377 for online expert help.

About Charley Bang Advanced   Online Technical Support Services

104 connections, 3 recommendations, 355 honor points.
Joined APSense since, January 5th, 2017, From New York, United States.

Created on Jan 18th 2018 08:41. Viewed 314 times.


No comment, be the first to comment.
Please sign in before you comment.