How to Bypass Color Ink Cartridge on Epson Printer?

by Oliver Smith Sr. SEO Executive

All the features of your Epson printer are impeccable, and you cannot stop bragging about it, but now you feel frustrated with your Epson printer because you don't know how to bypass color ink cartridge Epson? So, don't worry because we are here to guide you with the process.

Steps to Bypass the Color Ink Cartridge on Epson Printer

If you are ready to bypass the color ink cartridge on your Epson Printer, follow the steps mentioned below:

Keep the ink button down after opening the lid.
Once the ink cartridge holder comes to its position, check which ink is not present by opening the lid and now close it again without replacing or removing the cartridge.
This method will work on this Epson Printer because it does not have the microchip on the ink cartridge to track the ink levels.

The steps mentioned above play a trick with the printer and make it think that a new ink cartridge has been installed. If this trick does not work, and you are still wondering or have queries like how do I bypass the color ink on my Epson printer, then you can try resetting the ink cartridge.

To reset the ink cartridge, you will have to remove the ink cartridge from the printer. After this, check for the Copper contacts at the end of the ink cartridge. Now, in the center, just above the Copper contacts, you will find a resetting button; you will have to press this reset button with the help of a small object like a paper clip, a pin, or any other similar entity. The next step requires you to reset each cartridge one by one and place them back in their positions after resetting. This reset method will make the printer think that a new cartridge has been installed, and the printer will start printing again.

There is one more trick that you can use to do the job: shaking the ink cartridges. All you need to do is open the lid of your printer and take out the ink cartridges as explained above. Further, take out each ink panel one by one and shake them to redistribute the ink. You need to repeat this shaking process with each ink panel and after that, place the ink cartridge carefully back to their respective places. After this, command your Epson printer black and white only print to ensure that you have bypassed the color ink cartridge.

Even after following all the steps above, if you are unable to bypass the color ink cartridge, then, you will have to purchase a new ink cartridge.