How to Avoid Burnt Taste by Prime Your Vape Coil?

Vaping is a matter of pleasure, which one must assure while vaping. Else, you will not be able to enjoy your vaping experience. Proper enjoyable vaping consists of different things including the production of vapor and an intensified flavor. If you are not able to enjoy these two things, then it can be the result of the coil burnt.

To protect your coils, you must know "how to prime your coil?"

Depending on the frequency of the vaping you need to change the coil after a week or two. While you are changing the coil, we recommend to prime your coil. By doing this, you can avoid the overheating and burning of the wicking material.

We discuss the 3 different ways to prime the coil in the following section.

Suction method

One of the best and popular methods among the vapers is the suction method. It is darling of the vapers as it takes very less time to prime. The method is simple. You need to close the airflow to the base of the tank and start the suction just like you used to do vaping. However, do not switch on the power button.

It is important to close the air inflow to create the need for the suction. The vacuum created by suction helps the liquid to prime the coil. In case the coil will be flooded with the liquid, the chance is that you will get a gurgling issue.

The success of the step depends on the control and gentleness of your suction power.

Drum Method

It is as simple as beating the drum with a stick. Take your vaping device and start to shake it. Take the stick and lean it forward in the movement of hitting the drum. If you see the airflow valve is open, then shake it with force to let that air bubbles to come out.

The pressure in the tank created by shaking will help to let the liquid go deep inside to prime the coil. However, over the amount of shaking the coil may lead the liquid to come to your mouth.

Time and patience

Finally, the most common method that you will find in all the instruction manuals. In this method, you need to fill the vape tank and wait for at least 10 minutes. Those devices, where the tanks are small, and you cannot reach the cotton vape wick to make it wet with the liquid, this method is perfect.

However, you can leave the coils with a bigger opening also to let the cotton to be wet properly. Therefore, you can see the time it takes from which it derives its name.

Final Words

Therefore, you can see the 3 ways how to prime your coil. However, vaping is all about experimenting. If you use some other ways, please feel free to share with us.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Mar 11th 2019 05:35. Viewed 397 times.

Share on APSense

Comments