Articles
How to Arrange the Rolling Mills According to the Wire Diameter of the Finishing Product?
by Luoyang Judian Professional Steel Casting and Rolling Equipment MArranging the rolling mills according to
the wire diameter of the finishing product is an essential step in the wire
rolling process. The correct arrangement of rolling mills ensures that the wire
is rolled uniformly and with minimal defects. Here are some guidelines for
arranging the rolling mills based on the wire diameter:
1. Determine the wire diameter and
tolerance requirements: Before arranging the rolling mills, determine the wire
diameter and tolerance requirements of the finished product. This information
will help you select the appropriate rolling mills and set them up correctly;
2. Use mill stands in sequence:
Arrange mill stands in sequence based on the wire diameter and the desired
reduction ratio. Use smaller diameter rolls first, followed by larger diameter
rolls to achieve the desired reduction. Generally, the wire is passed through
each mill stand at least twice to ensure proper rolling;
3. Check the gap between the
rolls: Before using the rolling mill, check the gap between the rolls. The gap should
be adjusted to meet the wire diameter requirements. Generally, the larger the
wire size, the larger the gap between the rolling mill rolls;
4. Use correct roll material: The
roll material should be carefully selected based on the wire diameter and the type
of wire being rolled. Harder rolling mill rolls are generally used for thicker
wires, and softer rolls are used for thinner wires;
5. Consider the rolling speed: The
rolling speed should be adjusted based on the wire diameter. The larger the
wire size, the slower the rolling speed should be to ensure proper rolling;
6. Use proper lubrication: Use
proper lubrication to ensure the wire is drawn uniformly through the rolling
mills;
7. Inspect the finished product:
After rolling, inspect the finished wire for any defects such as surface marks,
cracks, or pits. If defects are found, it may be necessary to adjust the
rolling sequence or reduce the rolling speed to prevent further defects.
By following these guidelines, you can
arrange rolling mills correctly for wire diameters, ensure uniform and
effective wire rolling, and maintain the quality of the finished wire products.
Sponsor Ads
About Luoyang Judian 
Professional Steel Casting and Rolling Equipment M
12 connections, 0 recommendations, 149 honor points.Joined APSense since, November 9th, 2022, From Luoyang, China, China.
Created on May 9th 2023 02:32. Viewed 94 times.
