How to add Honda CRV 2015 Remote Key with Lonsdor K518

How to make a chip key with auto start on the Honda CR-V 2015. In the key chip ID49 Hitag 3 (Hitag pro). The remote control buttons are automatically programmed. Key rogramming is done with the Lonsdor K518ise key programmer.

Remote key 3 buttons

Note: DO Follow each IGN ON/OFF operation.

Connect K518 host with vehicle via OBD Socket

Select Immobilizer->Honda->Select from vehicle->CR-V->2012 up-> Immobilizer->Search Immo Type->Immo Type

Turn on ignition switch

Lonsdor K518 identified the immo type 2

Then go back to select IMMO2 and Add Key

Insert registered key and switch ignition ON

Turn off ignition in 15s

Turn ignition on with original key in 17s

Turn off ignition in 17s

Turn on ignition with a new key in 20s

Turn off ignition in 17s

Turn on ignition switch without replacing key in 20s

Turn off ignition in 15s

Turn on ignition

Check if the immobilizer indicator goes off

If yes, turn off ignition in 15s

Switch ignition on

The new key has been successfully programmed

Test all keys.

Done.

Report this Page