How is a Bedhead Panel Used in a Hospital and How Does One Select The Best One?
by Hospital Product Directory CEOHospital bed-head panels are particularly invented
units for hospital use, intended to unite all the indispensable values around
the patient’s bed. These bed-head panels are organized to carry user stations
for electrical power, lighting, communications, biosignals, data, and medical
gas and transmit a medical bar with a series of mountable fittings like
examination lamps, BP instrument holders, case sheet containers, IV and
infusion pump stands, bowl holders and the like.
Circuit-protected bed-head panels made by Bed Head
Panel Manufacturers have now become part of ICU and patient room setup in every
hospital. Normal configuration panels are obtainable for ICUs, wards, and
private rooms/ suites. Custom outlines to closely meet user necessities are
also available.
Hospital bed head panels are built from lightweight
extruded aluminum sheets and units and from stainless steel. The aluminum is
surface preserved with epoxy-polyester precipitate coats in a seven-stage
procedure which ensures lifetime protection to the metal exterior with the
comfort of cleaning and aptitude to endure injury from common hospital liquids
like saline, drugs, blood, etc. These lightweight boards can also be affixed on
non-brick walls made of siporex or gypsum board. All panels have security metal
dividers between high voltage, low voltage, and medical gas openings. Bed Head Panel Manufacturers build
a very wide variety of such boards to meet nearly every kind of need. Such
panels are obtainable in consistent as well as custom shapes which include
flat, perpendicular, running length, or wall angular alignment, in colors and
texture of choice.
Aspects
to reflect before buying the right bed head panel
The
span of the bed head panel
When buying a bed head panel from Bed Head Panel Dealers or
any other medical equipment, you have to consider the measurement of the ward
you want to equip. The faultless bedhead unit is contingent on the scope of the
room, and you must consequently reflect the length of the unit. Also, the span
of the bed head unit can be intended to serve multiple beds.
The span plays a role not only in patient ease but
also in the aesthetics of the hospital ward. In addition, the span of the bed
head unit also determines how many fixtures it can accommodate.
Medical
gas channels
The medical gas channels stream medical gases like
oxygen, medical air, nitrous oxide, etc., to patients. These channels are
intended according to different country canons, including American and French.
Also, the bedhead unit can house multiple medical gas channels, but this
depends on the span of the unit. So, elect a model that best suits your medical
ward. Also, Bed Head Panel Manufacturers can help you modify the medical gas
channel to your taste.
Electrical
vents
The electrical vents are an indispensable component
of a bedhead unit. The bed bread unit you buy must have a low and extra voltage
electrical vent. There can be more than two vents; though, the span of the bed
head unit will regulate the number of electric vents it can accommodate.
Fixtures
Ease is one of the main issues when selecting
fixtures, whether a clinic, hospital, dental center, or others. Medical wards
need the highest ease level as some patients often devote a lot of time to them
while experiencing a recovery process.
Due to the position of keeping patients contented,
look out for extra fittings on the bed head unit supplied by Bed Head Panel Suppliers.
First, there must be a nurse call system to support patients in collaborating
with the medical staff on duty.
There must be reading and investigation lamps.
Though, the lamps may be elective as the ward is anticipated to be
floodlit.
Sponsor Ads
Created on Dec 29th 2022 02:47. Viewed 126 times.