Guinea 600 tph iron ore crushing production line

By flattening or packaged treated waste iron and steel raw materials, through the slat conveyor transported to the feed ramp, the ramp is equipped with feed rotatable one high and one low two rolling rollers to flatten and sent to a crusher Inside. In the crusher, there are 10 fixed on the spindle and disc 10 arranged between the disc can freely swing the hammer, by the kinetic energy generated by high-speed rotation of scrap steel were smashed, torn, etc. crushing treatment, scrap processed into blocks or lumps, and through the lower part of the grid or the top of the falls on the vibrating conveyor. The first failed to deal with a small enough scrap iron and steel, it will be rotated in the disc crusher and hammer handle child again, until it can pass through the grid so far. Unexpected non-broken material into the crusher within a timely manner by an operator located below the open top of the discharge gate, they pop up. In the crusher at the same time, within the crusher water to cool down and to avoid dust.

Guinea 600 tph iron ore crushing production line

Sudan 500 tph barite crushing production line

When producing 1200 tons calcite production line configurati

When producing 1000 tons of mica production line configurati

From shredder was broken through vibration conveyors, belt conveyors, magnetic separation systems, the iron metal, non-ferrous material, non-metallic material separated by respective conveyor sent bunching. Non-ferrous metals and non-metallic objects on the conveyor will once again be searching magnetic separation equipment, the free iron metal picked, thereby increasing iron metal object culling, thereby improving the recovery rate of iron metal, while non-ferrous metals by artificial selection , improve the recovery efficiency.