Get Prepared with Proper Information Before Buying Push-On Fittings

In the past few decades, push-on fittings have garnered the reputation to be the fastest-growing technology for the pneumatic industries. The older methods of pipe and tube connections using compression and barbed technologies couldn’t sustain the demands for simplicity and accuracy in the system. You can buy push-on fittings for a variety of applications including general tubing, pneumatic controls, and automatic devices. However, you should be equipped with the right knowledge before buying them. Here are some important points to remember:
 
The Construction of Fittings:
 
The standard push-on fittings need absolute engineering precision in their construction. They comprise two basic components, a body and nuts. The body of these fittings should be designed from the high-quality durable material like stainless steel, aluminium, or brass. The body should be designed to maintain accuracy in the internal geometry and assembly. Moreover, the fitting body may be available in different configurations like elbows, tees, threaded, and unions. When making a fitting selection, you should consider the environment and working conditions of your facility to choose the right configuration.
 
The Perfect Installation:
 
The performance and efficiency of a fitting largely depend on its proper installation as well. Whenever you buy them, you must ensure an accurate installation with a focus on the tubing and threads. Sometimes, the fittings may offer limited applications with specific types of tubing. Also, there may be some products that are versatile to work with any type of tubing. You should ask the manufacturer regarding tubing compatibility. 
Similarly, there are some push-on fittings that can be transferred from threaded to push-in connections as well. The types of threads include NPT, BSPP, BSPT, and SAE threaded pipe connections. For the perfect mating of threads, you should check the manufacturer’s specifications carefully.
 
Precise and High-End Technical Specifications:
 
Typically, the operating parameters like working temperature and pressure can largely vary from one application to another. You should take proper care and buy push-on fittings that are compatible with these conditions. You may check the manufacturer’s technical specifications for detailed insights. The high-quality fittings made from SS 316 or SS 304 are designed to withstand up to 290 PSI and temperatures up to 160 degrees depending on the tubing material.
 
The Ideal Sizing:
 
Lastly, you should also understand the sizing mechanisms of these fittings to make a right selection. They are available in metric and fractional dimensions. The sizing may be available in terms of the outer diameter or OD of the tubing. For the identification of these two sizes, there may be a V-groove in the design of a fitting.
 
The push-on fittings are a viable component for many industries. When you need them for specific procedures and applications, you should choose a company that can customise its products as per your requirements.

Report this Page