Garnet Abrasives: What Actually Is It?

Garnet abrasive is basically mined out from mineral deposits of almandite, andradite in India and Australia. Garnet is quite a precious stone when its state is natural. The precious stone after extraction goes through the three processes of washing, processing, and screening to the needed grade to be used as an abrasive.

Garnet abrasive is basically a deposit of silicate mineral deposits, which occurs naturally. The solid garnet species for example, amandine are used and are in demand for abrasive purposes. Garnet abrasives can actually be recycled and taken up as a substitute for Aluminium Oxide, Steel Grit and Chilled Iron where conditions allow. Garnet Abrasives if you do not know is known to create less amount of dust than abrasives that are expendables as it breaks down readily.

Garnet Abrasive is one of the most useful, versatile and safe media for blast cleaning. If you wish to hoard up on the bulk amount of garnet abrasive, then you can contact the garnet abrasive exporters for cheaper rates.

• Garnet is the ultimate abrasive that can be used in the Blast Unit in almost all the applications.

• It is clean- Garnet abrasive produces gives off smaller quantities of dust than other abrasive expendables, thus making it a perfect element for use in confined spaces and tanks.

• It is cost friendly- Garnet abrasive is a long lasting element and is so useful that overall lower volumes are needed for most of the jobs.

• It is semi-reusable- Garnet abrasive can be semi-reused and has the potentiality of being re-used for quite a number of times under good conditions. The Garnet Abrasive breaks quickly than other abrasives which are fully reusable like the aluminium oxide.

• It as optimum surface- Garnet abrasives forms a high-quality adhesive surface coating.

• It is environment-friendly- Garnets are non-toxic and inert, which in turn makes its use around the water bodies safe and harmless. Also, garnet abrasives are quite natural to wash and clean, while the durability diminishes the dust generation.

Garnet abrasive is widely used in blast media for its quality of being high performance. It is used in blast media to lean the fiberglass structures and aluminium. Garnet abrasives are also used in and around sites that are known for water contamination, like in the bridges, docks, and harbours as it is non-toxic, inert, and mineral which occurs naturally.

Garnet abrasives are known for their low-production of dust as compared to other expendable abrasives, thus making it an apt product for use in containers and confined space.

Most people are of the idea that garnet is a bright red gemstone, but it actually is available occurs in myriad varieties of colours. Garnet minerals are available widely all across the world I sedimentary rocks, igneous and metamorphic rocks. Garnets are found in contact with metamorphosis rocks, lava flows, magma chambers, and also volcanic eruptions with a deep source.

Garnet abrasives are usually quite effective and are used in a variety of manufacturing processes. It breaks down in angular pieces when crushed, and provides sharp edges for sanding and cutting. Garnet is also screened and crushed for particular sizes and is sold in abrasive powders and granules.

Report this Page