Four common problems that come with commercial painting

If you want to ensure that the interior and exterior of your commercial property are maintained in the best possible manner, what are your available options? You may be tempted to take a DIY approach to it, but is that the best solution? Certainly not! Although it may seem cost-effective at first, commercial painting is a highly specialized job that should only be left to the local experts.

Professional commercial painting contractors offer a wide range of interior and exterior painting services that can help your commercial property look as fresh as new, so you never have to deal with clients walking away from your business. These services typically include preventative maintenance and renovations of existing buildings as well as doing up new constructions. Commercial painters also have the practical knowledge to adequately deal with a whole lot of problems that can affect wall surfaces, including:

·        Layers of paint peeling away on account of poor adhesion.

This generally happens when multiple coats of paint are applied to the walls. This is also a problem when there is a layer of primer below the top coat. The most common reasons for paint peeling are the presence of moisture in the wall and even the use of inferior quality paint. A competent and reliable commercial painter will always prepare the surface well before applying high-quality paint.

·        Blistering of the painted surface.

When the paint is applied to a wet surface or an exceedingly warm surface, then it promptly loses adhesion, typically resulting in the formation of blisters or bubbles. Some of the different ways of adequately dealing with this problem include preparing the surface properly and using an exhaust fan to ventilate and sufficiently dry out the area. Paint should never be applied in direct sunlight because it can lead to excessive heating.

·        Growth of mildew on the wall.

This results in odd patches of black or gray on interior and exterior walls that are damp and hidden from direct sunlight. This generally happens when the paint does not contain enough fungicide to prevent the excessive spread of mildew. The commercial painter should also remove mold from a surface before painting over it. Mildew can be instantly removed by treating the affected area with household bleach.

·        Lack of adhesion to galvanized surfaces.

Paint applied to galvanized metal exteriors is more than likely to peel away unless the rust that coats the surface is removed first. The commercial painter also has to apply primer before coating the surface with vinyl latex or oil-based paint.

These are just some of the problems that commercial painters have to deal with. As you can see, this is a job that involves a great deal of expertise, or else the finished walls will not look attractive and will not remain good looking over a long period. Reliable local painting contractors can be called upon to do wall covering, drywall finishing, and even to provide decorative finishes to walls such as murals and wall coverings. You, therefore, need to hire the best possible commercial painting specialist for the job.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 1st 2020 23:48. Viewed 464 times.

Share on APSense

Comments