Articles
For KTM BENCH ECU Programmer for BOOT and Bench Read and write 1.99
by Xing Tu sales managerKTM BENCH ECU Programmer for BOOT and Bench Read and write
KTM BENCH+BOOT Read and Write ECU Programmer Without Open ECU Computer No Car Limited KTM Bench
Note:
Please disconnect internet,do not update yourself . If locked,buyer need pay cost to send back repair. Do not risk this ,thank you .
KTM BENCH Functions:
1. NO LIMITS of the car model and year + NO NEED disassemble ECUs Read and write for Bos** ECUs (Infin***'s chips) incl. flash and eeprom
2. LESS RISK to clone/copy ECUs Able to modify data or do chip tuning to achieve superior performance
3. MUCH CHEAPER, compared with the same functional tools The price is 1/10 of other programming tools in the market
KTM BENCH Support：
Cover for B-M*W N20, N55, N63, etc. to change or read/write ISN codes (done with other tools)
Cover for Ben-tle=y MED17.1.1 to read/write immo data
Cover the latest for Ja-guar MED17.8.32
Cover for V-W MED17.5.5, MED17.5.22, MED17.5.25
...
ALL can be done without ECU disassembling Good equipment of high quality and with the best technology
Professional service and good efficiency
Read and write an ECU in two ways: BOOT and Bench
R/W an ECU via BOOT:
Package includes:
1pc x KTM BENCH ECU Programmer
What is differences between KTMBENCH ,KTMFLASH and KTMOBD?
- KTM Bench Boot is the latest ECU programming tool for ECU read and write via Boot mode or on bench.
- KTMFlash ECU programmer can read the chip data, read & write ECU data. read transmission data etc. at a high speed.
- KTMOBD programmer was born for reading chip data, reading and writing data of ECUs and a few types of gearbox. Read/write data by OBD.Supports most Japanese cars
| ECU programming tool | KTM Bench | KTM OBD | KTM Flash |
| Language | English, Russian | English, Russian | English, Russian |
| Software | **** | **** | **** |
| Run | USB dongle and software | USB Dongle and software | USB Dongle and software |
| Operating system | Window XP;
Windows 7; Windows 10; | Window XP;
Windows 7; Windows 10; | Window XP;
Windows 7; Windows 10; |
| Speed | High | High | High |
| Risk | Less risk | Less risk | Risky |
| Method | via Boot
on Bench (no need to open the cover) | via OBD | Most ECUs need to be disassembled for r/w |
| ECU disassemble | NO | NO | Most yes! |
| ECU read/write | Yes | Yes | Yes |
| Gearbox or transmission read/write | NO | Yes, only a few | Yes |
| Chip read/write | NO | Yes | Yes |
In conclusion:
All programming tools above can be used for ECU read and write, but differs in ECU coverage and Read/Write method.
All programming tools above can be used for ECU read and write, but differs in ECU coverage and Read/Write method.
There is NO LIMITS of the car model and year when using KTM bench to read/write data.
But if you have chips and gearboxes to read and write, you should have a KTM flash. The bad is: disassembling is required. KTM bench doesn’t cover chips and gearboxes and KTM OBD cannot not work good for gerabox Read/Write.
But if you have chips and gearboxes to read and write, you should have a KTM flash. The bad is: disassembling is required. KTM bench doesn’t cover chips and gearboxes and KTM OBD cannot not work good for gerabox Read/Write.
Sponsor Ads
About Xing Tu 
sales manager
14 connections, 0 recommendations, 139 honor points.Joined APSense since, May 15th, 2018, From shenzhen, China.
Created on Nov 7th 2019 04:27. Viewed 420 times.
Comments
No comment, be the first to comment.
