Fixing the Blue Screen of Death in 3 Steps

The blue screen of death is considered to be one of the worst computer errors. It can render your entire system useless, so much so that you cannot even get it running till its home screen. The screen freezes in a scene of blue background and error messages typed in white. Computer specialists over time have devised some blue screen of death fix to bail users out of the limbo. They work, depending on the factors causing the error. This article delivers three different ways to fix up a blue screen error, and details them for readers’ help.

Check Hardware

The first way to go about it is checking the hardware configuration of your computer. Usually the blue screen of death error is the product of hardware malfunctions. Get into diagnosing the problem by looking into the settings, if anything has been changed recently. If all is clean in the setting panel, check out if there has been a loose connection anywhere in the wiring in your cabinet. If a plug has come off or a screw needs tightening, attend to it to make sure that all cables go into where they should, and firmly so.

Temperature Control

Another reason could be the computer temperature. Overheating can be the principle cause of blue screen of error. Sometimes, components like the graphics card get overheated and that may affect the performance of the CPU. If you find that your graphics card is the source of overheating, talk to an expert about it. If not, then go to the BIOS setting and access the menu to see the temperature there. If all looks normal there, you need to test the RAM of the CPU.

The RAM Test

This will need you to open the cabinet like for checking the connections of the hardware. A RAM stick can be the chief cause of failure of your system. There is a program that is either available online, or with the experts. You may use them to examine the health of your RAM. If the result is okay, just take out the stick from its slot and rub it well. Rubbing removes the depositions that often cause the system to work slower or any less efficiently than it should. Return it back to its place and reboot the system.

Testing the hard drive is another of finding out if all is well in the memory section and fix blue screen of death. You can do this with the help of the chkdsk function.