Five Easy Deck Sanding Steps to Follow after Cleaning It
by Michael Griffin MichaelWhat are
the secrets for long-lasting and attractive timber decks? What are the best
ways to make a timber platform look attractive for a long time? Highly
professional deck maintenance service providers have the ability to answer
these questions correctly.
Regular
maintenance and professional cleaning are the secrets for long-lasting wooden
decks. When remaining exposed to the severe weather conditions, like, storm,
rain and heat for several years, outdoor decks often lose their shine and get
damaged.
One of the
best ways to protect it against the perils is to apply stain on it properly.
Before rubbing the stain on the timber structure, it is necessary to go for deck wash and sanding.
Below are some easy steps which are involved in sanding. Please check out these
steps now.
Step 1: Preparing the Deck
Before
sanding the deck, it is necessary to clean it thoroughly with the assistance of
professionals. Once outdoor decks are cleaned with the pressure washer, the
wood fibres often start loosening, and the surface becomes rough. In order to
make it smoother, the individuals should apply the sanding techniques with the
help of experts, and they should do it before applying the stain.
Before sanding it, they should inspect the wooden surface, railings, edges and stairs carefully. If there are any loose nails or rusty screws, they should be replaced with the new ones. It is also important to repair the loose boards and replace the rotten boards before proceeding further.
Step 2: Sanding the Surface
The basic reason
for sanding the hardwoods is to make the surface as much smoother as it is
possible. But, the same thing does not go for the exterior deck surface. When
it comes to sanding the deck floorboards, it is better to use sandpapers with
grits, rougher than 60. If finer grit papers are used, there are chances that
the stain will not be absorbed properly.
Step 3: Sanding the Board Edges
Sanding the
board edges can be quite difficult, depending on the deck design. If the
railings have low bottom blusters rail, it will become harder for the
professionals to perform their tasks. However, experts, who have years of
experience in deck sanding, know the
best ways to treat almost all types of decks. They use the best techniques and
methods for the best possible outcomes.
Step 4: Sanding Deck Railings
When
sanding a timber deck, it is important to pay attention to every small factor.
From the edges to the railings, every part is important. When sanding it, the
individual should not forget about the railings.
Step 5: Cleaning the Deck before Staining It
Once the
sanding process is over, it is necessary to seal it properly as soon as
possible. Deck cleaning, sanding and staining involve some complex techniques
which are known to only professionals. This is why deck owners often consider
seeking help from experts, rather than carrying out these tasks by themselves.
When
choosing a deck maintenance service provider, it is necessary to do some
research. By doing so, the deck owners will be able to make the correct choice.
Sponsor Ads
Created on Feb 5th 2020 05:15. Viewed 342 times.