Different Ways of Stone Floor Polishing Methods

Stone and mosaic floors must be polished to get its ultimate gloss. The smoothness also goes to the pick level when you polish it. Polishing makes the floor feel smoother and looking good. While polishing, you will get polishing powder, polishing machines and all other related materials. Natural stone floors can be made shiny by the following ways like the Buffing with polishing powders and compounds, crystallization, grinding with diamond abrasives, and applying barrier coatings. All these methods of Floor Polishing Sydney cannot be applied properly on all sorts of stone floors. They have some different criteria. So, the experts must be experienced in all respect.

Polishing Powders and Compounds

Polishing powder and its related compounds are exclusive of the fine dust of aluminium and oxidized tin (tin dioxide). They are used by machine polish so that you will get the stone shine. Whine accomplishing the process, some amount of oxalic acid has also been used to that the erosion process goes on very easily and effectively. This acid reacts like a crystallisation process. The dust or powder is put on the surface and made wet with water to create a paste-like thing. It is also called slurry. The machine is run by 175 RPM with a weighted floor machine. This process also goes on with the while pad or hogs hair. For having floor semi-gloss Sydney, or for complete gloss, you can use this process.  

Grinding with diamond abrasives

These abrasives will be treated by grinding of the uneven surface of the stone. Various shapes and grits are used to make the floor even. The gravel is made with the three to four inches of diameter circular padded disks made with diamonds. Under the floor machine, three to six disks are set. With Velcro, a floor machine drive plates are run. With the low speed of 175 rpm, the process continues. The scratches of the stone will be removed by the drive disk of the plate. The process continues until the floors are showing shiny gloss. While floor polishing in Sydney, you will get the ultimate satisfaction by using this process.

Coating process

The coating process is known as waxing of floors. The unpolished floors will be filled with some ingredients which will cover the uneven parts of the floors without grinding out the part. This process brings you an artificial shines. This is a process with which the wax, urethane, acrylic colour and some kind of polymer are applied to coat on the floor. You can get a fine mat gloss or fine finish by using the process. If you want a great coating process of floor Polishing Sydney, this process is unique.

Crystallisation process

Crystallisation is a process when a chemical named fluorosilicate is sprayed on the surface. Then it is polished with steel wool scrubbers that cause a glassy like shiny and crystallised layer on the floor. This process is named as the crystallised process of floor polishing. If you do not get floor semi-gloss Sydney and want a finely polished floor, you have to use this process to bring gloss.

So, choose any of the processes and enjoy polished stone floors. Some companies provide dedicated service on it.

Harmony Renovation is a company where stone masonry has been accomplished. Therefore, choose the best options to floor Polishing Sydney here and enjoy exclusive service experience at an affordable cost.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Feb 3rd 2020 03:31. Viewed 294 times.

Share on APSense

Comments