Call Brother Printer Support Number To Have The Ultimate Solution

It’s really too frustrating situation when your brother printer do not function well or stop functioning. Situation becomes full of anxiety when you have some deadlines for your project, interview or any of your important sales and your printer do not function properly. However, here you will know about some most common issues and solution to get your printer function well basically in a very significant moment.

Unable to print more than one paper

It happens that when you ask for printing more than one document then your printer print only one document. To resolve this problem you can either call Brother support number or you can go through the tips. Just go through the control panel and then make the right click on the printer icon and then select the properties. Now, just below the advance tab you need to enable features of advance printing. Now make it disable and then click on the OK.

Unable to print black and white

While using printer you need to make sure that ink color is full but after this also you are unable to do printing as printer continuously ask you to replace the ink. In this condition you can have the solution from the Brother technical support to resolve this problem.

Unable to print logo and text simultaneously

Sometimes you are unable to do the printing of the logo along with the text, thus you can either print anyone. Anyways, there are two ways of getting solution of this. You just need to use the anchor as the setting for text with the images and print from the PDF document.

Print directly to the fax

 If your Brother printer is default as the fax instead of doing printing every time then you need not to worry as this can be fixes just by making right click on the printer through the control panel and then make it default.

 Toner stops just before completing task

 Sometimes it happens that the printers do not allow for printing as it shows that you are out of the toner. Here you can use small piece of tape just at the bottom of the machine when you remove the cartridge. Make sure that you could be aware while your printer toner is getting low.

Always ask to replace the toner

While after replacing the toner you get the message as your printer is still empty but you can overcome this situation. You always need to replace or reset the printer to know the level of the toner. To have this you need to press clear or back button on the control panel just when you are opening the cover. Here you will have the menu of reset.