Bobcat Compact Tractor CT440 Steering Valve Removal and Installation Guide
by Dave Jack Auto Car Repair KnowledgeThis instruction show you guide on how to remove and install steering valve for Bobcat compact tractor CT440.
All about Bobcat service repair manual here:
BOBCAT Service Library 2019 Q2 Service Repair Manual Download
Removal And Installation
NOTE:
The following procedure is performed on a compact tractor equipped with
HST. Although the photos may appear different the procedure is the same
for compact tractors equipped with SST.
Remove the instrument panel.
Remove the two hoses (Item 1) from the steering valve.
NOTE: Mark hoses for correct installation.
Remove the two hoses (Item 1) from the steering valve.
Installation: Tighten the hoses to 25 - 29 N•m (18 - 22 ftlb) torque.
Remove the four mounting bolts (Item 1)
Installation: Tighten the bolts to 34 - 44 N•m (25 - 33 ftlb) torque.
IMPORTANT
When
repairing hydrostatic and hydraulic systems, clean the work area before
disassembly and keep all parts clean. Always use caps and plugs on
hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the
system.
Remove the four fittings (Item 1) [Figure 20-40-5] from the steering valve.
Remove the seven end cap bolts (Item 1)
Remove the end cap (Item 1)
Remove the O-ring (Item 1)
Sponsor Ads
Created on Sep 29th 2021 20:47. Viewed 214 times.