BMW M35080 Programmer - Buy M35080 Programmer Diagnositc Tool | VtoolShop

If you have M35080 Programmer , or if you want to use this programmer , so how to make this scanner work well ,and make it work it best function? It’s simple. but a little difficult . so here some tips and suggestion for you to make the m35080 programmer work well.

First , check all the function of the m35080 programmer here.

- view data
- backup data
- read original mileage
- clear KM data area – online direct data correction
- no need to remove the needle of the odometer
- can enter any KM value
This item can erase the data starting from “00″,no need to replace m35080 Chip, correct the mileage for BWM without removing the chip from the cluster, simply solder the line. Easy, simple and safe!

Only  you install the software well can you use the M35080 Programmer .

Just following the guidance:

To understand M35080 Programmer components meaning see Figure 1. To install
and use the M35080 Programmer, follow these steps:
• Install M35080 control software. Insert the supplied ETL CD-ROM in the computer and
navigate to “Install Software” > “Install M35080 Prog.”, then execute the “Setup.exe” file;
this will guide you through the setup process.

• Connect M35080 Programmer to the power supply source (12-14 V >=500 mA).
• Attach M35080 Programmer to computer. Use the 9-pin RS232C cable that is shipped with
the M35080 Programmer.
• Before connecting M35080 Programmer in ICP mode or inserting target IC M35080, make
sure that M35080 Programmer and the target board are not powered.

• Insert explored M35080 IC into target socket or connect ICP interface cable.
• M35080 control software can now be started. However, do not open control software and any
files before connecting power supply to M35080 programmer.
• Turn ON power switch. All LED’s appear to the short time, than LED1 (Yellow) will now be
lit, telling that power is present and M35080 Programmer ready to operate.

After you install the M35080 Software ,you can then use it.

Here is an video you can have a try:

http://www.youtube.com/watch?v=BXvDCOfKpBg

Follow this way , you can let your programmer work in the right way and make it work well.If you like the tool you ,I suggest you go to the china auto scanner online store , it may help you find it.