BMW ICOM is a BMW approved dealer OBD-II diagnostic tool for BMW, MINI Cooper and Rolls Royce with ISTA-D, ISTA-P software and other engineering & developing software applications. ADK auto diagonstic supplier has icom a, icom a2bc and icom a3 available. 

BMW ICOM hardware:

The BMW ICOM hardware has been released to third generation, ICOM A, ICOM A2 and ICOM A3.

All BMW ICOM A+B+C systems come with ICOM A, ICOM B and ICOM C emulators.

ICOM A – main adapter with OBD II connector for MOST, KCAN, DCAN

ICOM B – additional adapter for optic line, use USB connection with ICOM A

ICOM C – adapter for old vehicles with round 20-pin connector.

BMW ICOM ISTA-D ISTA-P software:

BMW ICOM software has two formats: internal software HDD and external HDD.

The ISTA/D diagnostic system stands for Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.

The ISTA/P programming system is an ISPI application and stands for Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.

The BMW ICOM Rheingold ISTA-D ISTA-P diagnostic & programming software comes with engineering software INPA, EDIABAS Tool32, NCS-expert tool, E-sys, Ncs-Dummy etc.

-INPA (used for diagnosis)

-EDIABAS (used for diagnosis)

– BMW INPA (used for Diagnosis and error resetting)

– BMW NCS Expert Tool (used for coding – activating new options like BMW dealers do)

– BMW WinKFP (used for updating the software from modules on the car)

– BMW E-sys (used for coding newer BMW F series cars)

If you wanna know more about BMW ICOM Series diagnostic tools, please contact us via skype @autodiagnostickit or visit ADK auto diagnostic online shopping mall.