Articles

Blink Camera Red Light | Blink Camera Not Detecting Motion | +1-800-983-7116

by Cynthia Parker Security Cam Helpline

Blink Camera Red light signifies that your device is not connected to the internet. The Blink camera flashing red light also means that the camera is in setup mode currently. Don’t worry, the red light will be changed to blinking green and then solid blue light if you are doing the Blink Security camera setup.


If you have found that your Blink camera has stopped working after the red light issue then, here is the guide for you. We are going to tell you some troubleshooting methods to fix this issue quickly.


If you need some more help then dial the given Blink Camera Customer Service Phone Number now.


Blink Camera Red Light: Reasons


One of the major reasons why is your Blink Camera Blinking Red is the weak and faulty internet connection. Until and unless you will not connect the security to the wifi your Blink Camera will not record single footage.


Also, don’t forget to check whether you have connected all the cables properly or not. A loose cable connection could be responsible for why Blink Camera Not Detecting Motion. Make sure that the base station is placed close to the router.


We are going to tell you some best and easy troubleshooting methods to fix the issue. You need to follow them until the Blink camera Red Light issue will not get fixed.


How To Troubleshoot the Blink Camera Red Light issue?


If you are worried about Why Is My Blink Camera Flashing Red then repeat all the steps in the same order. It is very necessary to check the wifi device first. Apart from it, update the Blink camera app on a regular basis.


  1. Check the Internet Connection: If your Blink Camera Flashing red, then check your internet connection properly. A faulty and bad network configuration is one of the major reasons why Blink Camera Offline. Once your device will be connected to the internet, it would be easy for you to control it via mobile application.


  1. Blink Camera Setup: If you are doing the Blink Mini setup, it is the part of the setup to see Blink Camera Red Light. In this case, you don’t need to worry as it will disappear after a while.


  1. Remove Damaged Batteries: Make sure that the batteries of the camera are working properly. Faulty and damaged batteries could be responsible for why Blink Camera Not Recording anything.


  1. Restart the Blink Camera: Restarting the technical devices often resolves the issue quickly. So, remove the power plug from the wall outlet and wait for at least 10-20 seconds. Turn ON the camera again and check if the red light issue is resolved.


  1. Restart the Wifi Device: If you have checked and found that it’s the wifi because of which blink camera flashing red light then restart it. To restart the router, remove the power plug and other connected cables. After 30-40 seconds reconnect the cables again. This may fix the wifi device issue, if not then contact your network service providers.


  1. Reset the Blink Camera: This is the last troubleshooting method to resolve the glitch within your security camera. To reset the Blink camera, long-press the reset button with the help of a thin pin until the device will not restart.


Conclusion


In order to conclude this article, we would like to say that you must have a good speed internet connection. Several times, the wifi stopped working and the Blink Camera Red Light issue occurred. Although, we have told you all the steps to fix the problem. But, if you still need any help then dial the given Blink Camera Customer Service Phone Number now.


Sponsor Ads


About Cynthia Parker Freshman   Security Cam Helpline

3 connections, 0 recommendations, 28 honor points.
Joined APSense since, August 20th, 2020, From Dover, United States.

Created on Jul 15th 2021 02:51. Viewed 42 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.