Bendi IV Series Lift Truck Navitas Controller Correct Discrepancies Guide
Landoll Bendi Forklift Service Repair PDF Manual Download
Effectivity
Bendi series iv lift truck with navitas controllers and a single curtis bdi (pn 139879) installed.
Reason
To correct discrepancies between the curtis display and lift lockout function of the navitas controller.
Description
This modification consists of adjuting the curtis bdi mounted in the steering column.
Compliance
Work is to be performed when in area or during preventive maintenence
Technical Information
Bulletin sent to provide technical information regarding a minor adjustment that is to be applied as required.
Labor
Maximum
of 1.0 hr labor will be allowed. as stated in compliance (see above),
this modificaiton is to be performed during preventtive maintenance.
therefore, no travel and/or diagnostic time will be paid (unlike
standard procedure) to perform this modificatrion.
Procedure
Remove
steering wheel and instrument panel assembly. adjust setting on the
rear of the curtis bdi to “m” as shown on fig.1. reassemble steering
column.
Testing
Turn on key and check
for operation of the bdi. note: depending on the state of the battery at
the time of this modification, the bdi may require one charge cycle of
the battery to reset and accurately display battery information.
Post Your Ad Here
Comments