Apply Carbon Fiber Sheets For Car Interior Trim | How? Explained!

by Ncious Ch Ncious - Get Everything You Need to Know

Have you bought carbon fiber sheets like 3M Di-Noc for your car interior and you don't know how to use them? If yes, then this guide may be a pleasant surprise for you. Carbon Fiber Vinyl Sheets come in highly custom packages and cannot be returned after sale. Therefore, it is very important to apply them correctly on the first try. To learn the step-by-step process of installing Porsche Carbon Fiber sheets, read below.

Cleaning the Surface Where the Application

Start by thoroughly cleaning the surface where the program is applied. Even a small amount of dirt can affect the adhesion of the vinyl sheet. Although the carbon fiber layers are unstructured and smooth, they adhere well without sticking.

Pack of Carbon Fiber Sheets

Once the surface is clean, remove the carbon fiber sheet pack you ordered for your car. Be sure to open the fiber film carefully without confusing it. When opening the sheet of vinyl, place it on your knees and sit upright. This allows you to easily work with the sheets, apply them to the interior of your car.

Cut the unopened sheet of vinyl to the desired size and then begin the process of gluing the sheet to the application area. When applying the sheet to the application area, be sure to press it down properly so that the sheet adheres well to this area. When the application process is complete, use your fingers or the tip of a pencil to mark the perimeter of the application area.

Outline of Your Application Area

Once the outline of the application area is clear, take a sharp knife or other similar tool and carefully cut the extra sheet of vinyl placed around it. Once the excess carbon vinyl fiber layer is removed, you will be amazed at the appearance of a clean, shiny new carbon fiber.

When placing a carbon fiber vinyl sheet inside the car, be sure to press the vinyl sheet at least 1 inch behind the application area. In this way, you can make sure that the fibrous plastic adheres well to the surface. If the fiber layer is not installed correctly, it can come off over time.


You can also use a heat gun to stretch and glue the vinyl sheet to the folded areas of the car interior. By following these tips, you can easily apply layers of carbon fiber to your car!

Sponsor Ads

About Ncious Ch Advanced   Ncious - Get Everything You Need to Know

1 connections, 0 recommendations, 143 honor points.
Joined APSense since, February 20th, 2020, From New York, United States.

Created on Oct 19th 2021 08:27. Viewed 166 times.


No comment, be the first to comment.
Please sign in before you comment.