Adding TOYOTA G remote when lost all original remote key?

If you lost all original toyota G remote transponder chip, how to add the new G Chip remote or programming new G Chip remote? we (Vipprogrammer.com) recommend you to use TM100 transponder programmer and Xprog-m ecu prorgammer work together.


And you just need to follow the manual step by step:

1) Remove IMMO box from instrument cluster
2) user XPROG-M to read out the 93C66 Auto IC data and save it to your PC.
3) Open TM100 software, find 93C66 module of Toyota Camry after 2005
4) Clike “open file” to upload 93C66 data you saved before.
5) choose “use original facotry chip”, click “OK”, Choose “Key position 1″ to write start. Then TM100 will generate the new data.
6) Write this data back to 93C66.
7) Install the IMMO BOX back to your car. Use the new key to start your car directly.

 V3.09 TM100 added the following information:
     1. Add keymaker: China vehicle, Delphi Immobox, 93C66, ID48. Models: GreatWall Hover,Wingle,Voolex C10,C20,C30,V200,V240,X240, ZhongHua;
       1. Bugs fix;

Notes:  EEPROM is 93C66B, SOT-23. You can read it by XProg using Microchip 93xx66B. The wire schematic from 6-PIN to 8-PIN can be got from technical support;