Articles

A Step-By-Step Guide For Harley Davidson Oil Change in Boulder City

by Maria Smith Digital Marketing Specialist
Everyone is affectionate with bikes and purchases different unique bikes. One of them is the Harley Davidson bike, which is widely used in Boulder City. But some people do not know how to perform a Harley Davidson Oil change in Boulder City on your own. So, this article provides you a guide to teach you how to change the oil in your favorite bike. 

coveralign="none">


Step-By-Step Guide For Oil Change in Harley Davidson:

Step 1: The first step is to pull out the oil cap situated on the bike's right side and near the passenger peg. But before performing this step, first, verify the level of oil, whether it is correct or not. If there is leakage of oil or the oil level is too high, it becomes a big problem. Turn the oil cap off, which will let the old oil move out quicker. 

Step 2: The second step is to check the drain plug, which is situated below the bike. After navigating it, grasp the drain pan and open the plug using a 5/8 socket. Now, take-off the drain plug and allow the flow of oil to move into the drain pan. 


alt="" align="none">

Step 3: At the time when an oil drain takes place, you can check out the other essential things. This time, you can check the drain plug magnetic side whether the metallic shards and silver are dust-free or not. When it gets completely cleaned, then it will be active to reinstall. Harley Davidson oil change in Boulder City can be done easily by following these steps. 
 
Step 4: Now, take off the old filter with the Harley Davidson oil filter key and use the new oil into the new filter to keep the filter media greased. This will allow the running motor to dry within a second. 

Step 5: Before moving ahead, use the new oil with your finger and apply it around the gasket to avoid it from sticking. Now it is time for us to remove the splash shield, wipe the housing clean, and place the new filter.

Step 6: Now, exclude the splash shield, clean the area, and attach the new filter by attaching it with your hand. Provide it 3/4 turn without pulling it down as it may break. 

Step 7: In the last, move out the funnel and keep the cap at its original location. Examine the level of oil and the engine becomes cool or not. Run the engine and check if everything is running perfectly or not. 

You can avail of this service from the Lakeside Service in Boulder City. If you have a truck and face some oil change issue, then contact them. They also offer Light truck Tires in Boulder City.

Verdict!
Find the Harley Davidson oil change in Boulder City with the above-explained steps. 

Sponsor Ads


About Maria Smith Advanced   Digital Marketing Specialist

137 connections, 5 recommendations, 322 honor points.
Joined APSense since, November 3rd, 2020, From Dallas Texas, United States.

Created on Dec 7th 2020 02:07. Viewed 251 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.