A few instructions to keep your hospital bed healthy

Today, the hospital bed has become an essential part of patient care knowledge. Technological progressions have taken modern-day beds into a different aspect both for patients as well as caregivers. When it comes to the upkeep of the hospital beds made by Hospital Bed Manufacturers, it’s authoritative that every piece of the bed is operating perfectly to distribute quality patient care. Beds are being used in the hospital 24 hours a day, 365 days a year, so they must be in peak condition for the security of both the patients and the caregivers.

WHAT GETS TESTED IN HOSPITAL BED OVERHAULING?

Almost every purpose and piece of the bed gets checked in a service. This is to safeguard that the hospital bed is still carried out as well as it must be, and to make sure that patients and staff are harmless to use it.

The service engineer will carry out some pictorial valuations on the bed first. This will give them a good impression of how the bed is faring up overall and it will help them classify any possible problem areas that may need some overhaul work.

They’ll check the bed ends, framework, base, and side rails for any obvious damage that may be a reason for concern. The engineer will also check the handbrakes and castors for any noticeable wear and tear that may affect the maneuverability of your bed.

After that, the engineer will check all the electronic apparatuses on the hospital bed, including the tilt, lifting, head, and foot mechanisms that make the bed profile and move around according to the position. They will also examine the motors and control case on the bed for any noticeable damage.

If the bed is tailored with a sensor or an alarm to indicate when a patient is off the bed, the engineer will check this to ensure that it is still in safe working order.

The engineer will also take a look at the handset (both the patient and nurse control boards), modifier, and power lead for wear and tear. Lastly, they’ll check the full process of the bed – including all the various locations it can move to – to see if there are any questions or glitches with the movement of the hospital bed.

Pretty much every constituent of the hospital bed will be checked during a package to ensure that the tackle is safe to use and still carried out well. This goes for almost any specialist healthcare equipment, and you must make sure it’s carried out frequently.

Though, to safeguard that the bed functions correctly for a lengthier tenure, certain things need to be followed at your end. Here are the Top Seven Instructions which need to be shadowed to safeguard the best patient care experience.

#Tip 1

The most significant thing to recollect is that any upkeep or servicing of the hospital bed needs to be carried out by the company-appointed skilled service engineer who provided you with the bed. You might already have a hospital bed repair contract in place with the Hospital Bed Suppliers that supplied your apparatus; if so, contact them to organize a service if essential.

#Tip 2

It is very important to ensure that all the purposes of the hospital bed are in an acceptable working state before the bed is assigned to the next patient. That reduces any kind of danger and safeguards better patient care.

#Tip 3

To safeguard the smooth working of the bed it is very important to grease all the mechanical joints/pins/moving parts of the bed and shrink the pins and this activity must be carried out at least once in three months, to avoid needless sound and wear & tear of the bed.

#Tip 4

When the Bed is not in use for a long time, it must be stockpiled in a dry and flat indoor setting that is rodent-free with an incline of not more than 5 degrees. It is also essential to conduct an examination to check for working and any electrical or mechanical harm that may have been caused due to the non-usage of the bed. Please contact your Hospital Bed Suppliers to get the same examined by the skilled service engineer.

#Tip 5

Contingent on the usage of the hospital bed, certain moving parts may require substitution due to the standard wear & tear. It is always suggested to do timely substitution of those parts with authentic company-provided spares for security and hassle-free operation.

#Tip 6

It is vital to conduct a visual review of the bed at regular breaks to check for any mechanical impairment (e.g. slackening /absent rivets, screws, etc.) which will safeguard the smooth functioning of the bed in the long run.

#Tip 7

If any upkeep activity is carried out on the hospital bed, it is always suggested to free the mains supply before conveying out any such activities.