A Detail Idea on Network Cabling

by Ryan Brown Worldwide Leading Supplier

Picking the Right Cable Type

In network cabling, there are several types of cables used and in a different manner, each of them works. The choice of the cable is determined by the protocol, size, and topology of the network. A few of the cables used are:

Un-shielded / Shielded Twisted Pair: VOIP phones, access control, wireless access points, building maintenance systems, network cameras, etc are the areas where this type of direct attach cables is used. Incidences of network failure are less and a high degree of reliability is offered by these cables.

Fiber Optic: with great broadband capacities these cables are equipped and to transmit huge loads of data over large distances at super-fast speeds they are used. Another feature of this cable is low power consumption.

Coaxial: by your cable television contractor these cables are normally used.

So that they can provide the best electrical insulating properties all cables have to be protected from mechanical corrosion and abuse. In this context, a heat shrink boot is highly useful as over the cables this forms a waterproof seal.

The Cabling Components

In network cabling, an important role is played by several components. You can buy direct attach cables online. The wire labels and managers, data jack, patch panel, supports, RJ 45 connector, fire stop sleeves, wireless access points are some of the components used.

Installing Network Cabling

By qualified personnel, the network cabling design should be done. For an effective network cabling, numerous factors have to be considered here. Some of them are:

•    Trunk Pathways above the Ceilings: Many precautions using the accessible region of the ceiling and so on have to be undertaken here such as moving away from electrical light fixtures.

•    The location of network equipment and racks: The Main Distribution Frame Data Room is the room which will contain the racks and the equipment. To house all items, it has to be sufficiently large.

•    Choose the cabling solution: the type of cabling solution he wants to implement must be chosen by the customer and he must also select the cabling vendor.

With new technology, the old paper-insulated technology has to be connected at some places as most of the new cable installations of the direct attach cables are of the polymeric type. The transition joint, playing an extensively crucial role in this context, does this.

Cable Terminations

For cable terminations, a stripping and cutting tool should be used to obtain a smooth cut on the jacket of the cable that helps. The termination chart of the patch panels has to be well laid out, the cable has to be nice and uniformly dressed and the pin-out has to be checked when you install or buy direct attach cables.

Network Cabling Testing

To ensure that all procedures have been done perfectly Cabling testing has to be done. In the market, several effective testers are available and in the form of cleaned up PDF files, they give the test results.

Sponsor Ads

About Ryan Brown Advanced   Worldwide Leading Supplier

84 connections, 1 recommendations, 326 honor points.
Joined APSense since, January 14th, 2019, From Kowloon, Hong Kong.

Created on Jun 7th 2019 03:36. Viewed 189 times.


No comment, be the first to comment.
Please sign in before you comment.