A Breakdown of Common Swimming Pool Maintenance Chemicals in Duluth

The chemicals in your swimming pool balance out the water’s quality and keep your swimmers safe. You cannot risk people getting ill from swimming in a contaminated pool and, yes, that can happen. The best pool maintenance company in Duluth understands the optimal way to keep your swimming water fresh, and it will offer chemical treatments as part of its maintenance to ensure that your pool is always safe for swimming. Here is a breakdown of the common swimming pool maintenance chemicals in Duluth to help you better understand why they are so important.

 

Alkaline Balancers

 

You pool’s water must be able to resist pH changes, as this prevents you from having water that is too cloudy and scaling on the surfaces. Swimming pool maintenance chemicals in Duluth include balancers designed to boost your pH levels when they’re too low and reduce them when they’re too high. In laymen’s terms, these are called alkalinity increasers and pH decreasers, and a pool maintenance expert will know which ones will work best in your swimming pool. The goal is to maintain an optimal pH level between 7.2 and 7.6, as this provides the optimal acid-to-alkaline environment in the H2O.

 

Calcium and Magnesium Levels

 

You do not want your swimming pool water to be too hard. What causes hard water are calcium and magnesium levels that are naturally found in H2O. Even in Georgia, the water has both of these minerals in it, and a pool maintenance company in Duluth should keep a wary eye on your numbers. If the water is too hard, you’ll get the same nasty deposits and scaling on the sides of your pool as you do inside in your sinks, tubs and showers. You want to keep the mineral density below 250 parts per million. If it’s higher than that, you need a scale and stain control chemical.

 

Chlorine

 

One of the most common swimming pool maintenance chemicals in Duluth is chlorine. You cannot keep your water safe for swimming without it. People carry bacteria, germs and viruses into your pool with them, and you know your swimmers pee in the water even though you’ve put up a sign asking them not to. The water itself will begin to breed bacteria and fungus naturally, as well, if left untreated. It’s just a simple fact of moisture and warmth going hand-in-hand to turn your pool into a petri dish. You need chlorine to keep your water fresh and free from contamination.

 

A pool maintenance company in Duluth will add chlorine when necessary and then check the levels to ensure that it is safe for your swimmers to dive in. If you have a serious fungal problem, the technician may “shock” the pool water, which means pouring in a high concentration of the bleach. This is usually in the amount of 5.0 to 10.0 ppm, and you cannot jump into the water until the levels have reduced naturally through evaporation to 1.0 to 3.0 ppm. As you can see, this can be complicated, so enlist the help of a professional today.