The Link Between Water Damage and Mold Growth in Brampton Properties

Conditions such as water damage are a familiar problem to Brampton homeowners as well as property managers. From water seeping through the walls due to a flood, water dripping from the roof as a result of a leaking roof, from pipes that have burst or from humidity, too much moisture is disastrous to structures. Mold is one of the most severe effects of water damage that are left untreated. Mold has a natural tendency of growth in areas that are moist and this is made possible when water damage occurs and is not repaired. This means that it is important for owners of structures, be it residential or commercial, to be able to identify the relationship between water and the mold so that the expenses needed for eradicating the problem will be minimized and the residents protected from the effects of the mold. This is where professional mold removal in Brampton can be of essence.

 

 How Water Damage Causes Mold Growth

 Mold spores are existent and are always ubiquitous in the environment whether indoors or outside. However, these fungi need certain environment to thrive and proliferate – moisture, warmth and most importantly organic matter. Many times, a property may have a water leak through a burst water pipe, a roof, or basement and water seeps into walls, ceilings, carpet and any other coverings. Mold can start growing within 24 – 48 hours especially in affected areas that are usually damp.

 The seasonal and sometimes high humidity in Brampton also complicates the issue and its infrequent heavy showers do not help either. Structures which may have poor barriers and no proper ventilation systems are likely to experience cases of water infiltration hence contributing to mold growth.

 

 How Sources of Water Damage Affect Brampton Homes

 Leaky Pipes and Plumbing Issues: Leaky pipes, faucets and plumbing are several reasons why water damage is usual in Brampton houses. This can remain unnoticed for many days, for instance, if water gets to penetrate behind the walls or under the floor. Being trapped in the building structure, this moisture creates conducive environment for the growth of mold.

 

 Flooding and heavy rainfall: This is true since Brampton receives relatively heavy rainfall during one or two seasons in a year hence causing flooding especially basement flooding. If the flood water was not pumped off and the flooded area not well dried, formation of molds is almost unanimous.

 

 Water Damage: There are many causes of water damages but four remain most prominent and they include the following; Roof leaks are another common cause of water damages. Water penetration in a home whose roof is damaged leads to seepage of rain water in the insulation, drywalls and wood structures. These materials when wet become perfect environment for mold colony formation in a very short time.

 

 High Humidity: Areas such as bathrooms, kitchens and basements are some of the areas that people make little use of ventilation. This is one of the main reasons why trying to control ventilation is important because there is a tendency of moisture depositing on surfaces and causing water damage after sometime. High humidity levels in a property would also encourage growth of mould especially areas that are closed and does not have good air circulation.

 

 Why Mold Growth is Harmful?

 Consequently, mold growth is a potential health hazard, mainly when the problem is not addressed punctually. Mold releases small particles called spores in the air and if occupants are within the building, they may inhale them. Dangerous health effects of mold spores are allergenic reactions, respiratory diseases, and in some cases chronic illnesses after long-time exposure. Mold also has adverse effects to those with asthmatic or the compromised immune system or with respiratory disorders since it worsens their condition and can cause serious consequences.

 

 Mold from a structural perspective also reduces the strength of construction materials. It causes severe damage on timber, gypsum board, and other insulating materials within the property debasing the structural soundness of the property. This can lead into some costly fix and even reduce the value of the property if it is not corrected the right way.

 

 Professional Mold Removal – Brampton

 This is a clear indication that whenever there is water damage and there is formation of mold, then the best thing is to act fast. Mold removal in Brampton needs to be handled professionally thus the best way to do away with mold and ensure it does not grow again. Mold remediation specialists determine the level of mold infestation, find out the source of moisture and prepare and implement a plan for mold removal. This involves drying of the affected area to the recommended level; removal of water affected materials and treatment of the area with mold inhibitors.

 

 There are many mold remediations in Brampton that are licensed, and they employ specific equipment in finding mold in places that cannot be seen. They also adhere to set guidelines to guarantee that removal of mold is done effectively to reduce the spread of the molds.

 

 Conclusion

 Flooding and mold are interconnected issues mainly because water penetration in building structures is the main cause of mold formation in areas that experience extreme weather conditions such as Brampton. Since the issue of mold is highly associated with water damage, timely, and proper handling of moisture in a property is critical in avoiding mold enhancement. The mold is a nuisance as well as causes health issues to the people occupying the premises, then, professional mold removal is crucial in Brampton for homeowners and property managers. It is therefore important to prevent appearance of mold and seek water damage remediation services to avoid major damage on the property.