Articles

5 Water Conservation Tips

by Kevin Smith Author

Have you experienced an increase in your water bill expenses or wondered if you’ve been wasting water this whole time? It could be that you need a little upgrade on your plumbing at home. American families can save water and expenses by using products labeled with WaterSense and EnergyStar certified appliances as per EPA (Environmental Protection Agency). Worry no more, we got you some ways on how you can conserve water.

 

Conserve water using this tips:

1.   Use Energy Star-rated appliances.

Today’s technology has come up with water conservation solutions which are environmentally friendly which can be a good bang for your buck. For example, appliances that are rated by Energy Star are known to conserve water and energy. Today, washing machines, modern dishwashers, and water heaters have economic settings you can use to make them run efficiently with lesser energy and water to worry about.

2.   Pick and take care of your water heaters wisely.

Corrosion—one of the biggest enemies of a water heater. Corrosion is one major reason why your neat hot shower might reduce its lifespan. One way to keep intact is to regularly drain a few gallons from the tank to flush out the sediment that leads to corrosion.

 

On other hand, old units tend to waste more water than usual. Hence, if your unit is 15 years or older, consider having it replaced as it can cost you more to keep it than investing in a new one. Considering modern heaters  are much more efficient, it can also help you reduce the energy and water bill.

3.    Replace old toilets.

Here’s the catch, toilets that are made before 1994 are outdated and need replacing. They can waste up to 7 gallons of water per flush. Whereas, new toilet designs can only use 1.28 to 1.6 gallons per flush. Huge difference, isn’t it?

4.    Make frequent home inspections.

Nothing can beat a good, thorough inspection of your house. Allotting an ample time to make frequent inspections can make a huge difference in maintaining your homes and keeping your house intact, including the plumbing situation.

 

Another trick to inspect if you have leaking pipes is to check your water meter. If it’s running even if no one is using the water in the house, that means there's a leak hidden somewhere.

5.    Aim for low-flow fixtures.

The most efficient faucets and shower heads are born to be low-flow fixtures. In order to know if you’re buying the fine type, they are mostly labeled with WaterSense. Saving an average of 700 gallons of water per year, EPA reports that these models can tremendously help in conserving our water.

 

Save water and money!

While conserving water is also considered as vital for the environment, you can also save up an awful amount of money just by switching to low-flow fixtures or modern plumbing technologies. This can be made possible just by reaching out to your local plumbing service provider and learning from the experts to make a good bang for your buck.

Sponsor Ads


About Kevin Smith Senior   Author

141 connections, 0 recommendations, 681 honor points.
Joined APSense since, December 7th, 2016, From Utah, United States.

Created on Mar 18th 2021 01:57. Viewed 75 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.