Mobile phone battery charging and maintenance

or beads of the type of conductor exposed electrode and battery contacts, the formation of these substances may make the current loop and become very hot, causing injury to persons. To prevent accidental leakage, should be properly placed on a charged battery, with special attention on your pocket, including the battery. After removing the battery from the phone, the battery should be stored in the protection sleeve. Long battery when not in use, the battery should be placed in protective cover, in dry, shaded storage. Do not phone battery in high temperature (over 60 ℃), such as high temperatures, high sunshine of the window. The other, in the low temperature lithium battery, it may not guarantee the desired phone standby and talk time. *  

Mobile phone battery charging and maintenance should be started first. The first charge on the battery life after a great influence on the general requirements for the first time charge for 16 hours (if the batteries are exhausted should), but remember not more than 24 hours, or they may be to charge a bad battery. Charge after every use requires recharging every 5-6 hours. For new batteries, after several charge and discharge to achieve the best results.
It should be noted: Do not use half the battery charge when the battery has been used or suddenly stop using a few months. The standard battery life of one year. Use every two months a year can put a battery for extended battery life so good effect, but all new batteries need not discharge before each charge. Finally, please note that leakage of the battery will not continue to use, or worth the candle. Dell inspiron b120 battery  Dell xps m1210 battery  Dell inspiron xps m1710 battery  Dell inspiron 1100 battery .
Battery should be used originally attached to the charger original, try not to use a full multi-unit charger. General phone with the travel charger, able to do so, as far as possible use of seat-type charger. From the mobile phone directly through the manufacturer to retain charge of this function, it should be a certain degree of technical support. However, damage to the components of such failure on the analysis, generally charging current is too large, over the phone charging circuit within the load caused by, resulting in the failure of these main reasons: First, the current power grid voltage instability in many cities in China, in particular the relatively high voltage at night; 2 is due to poor quality batteries, or battery power caused by using too ruthless. On the mobile phone users, the fast charge current best as a temporary or emergency charging method, the use of seat rechargeyour batteries as the main charging. As a way even after the failure, nor will it harm the phone itself.

Dell e1705 battery  Dell d830 battery  Dell inspiron 2200 battery  Dell inspiron 640m battery 

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 31st 1969 18:00. Viewed 0 times.

Share on APSense

Comments