123t/h Basalt Impact Crusher Indonesia
Crusher introduction:I produced a series of impact crusher can process side length of 100 to 500 mm material, the compressive strength of up to 350 MPa, with broken than large, broken after the material was cubic grains, etc., suitable for crushing hard materials . This series of Impact Crusher (Crusher) is my company absorbing the international advanced technology, combined with sand and gravel industry specific mining conditions and the development of the latest generation crusher. It uses the latest manufacturing technology, the unique structural design, processing was finished cube, no tension and cracks, grain shape is quite good, can crusher feed size of not more than 500mm, compressive strength no more than 350MPa of various coarse, medium, fine materials (granite, limestone, concrete, etc.), widely used in ore crushing, railway, highway, energy, cement, chemicals, construction and other industries. Its particle size can be adjusted discharge, broken specifications diversification.
This series of impact crusher can process side length of 100 to 500 mm material, the compressive strength of up to 350 MPa, with broken than large, broken after the material was cubic grains, etc., suitable for crushing hard materials, such as cement limestone crushing plant, with production capacity, the advantages of small particle size of the material.
Features counterattack crusher
1, the feed opening, high crushing chamber to meet the high material hardness, block degree, the product powder less.
2, the back plate and the board hammer gap can be easily adjusted, effective control of the particle size, particle shape is good.
3, compact structure, machine rigidity, the rotor has a large moment of inertia.
4, high-chromium plate hammer, impact resistance, abrasion resistance, impact force.
5, keyless access, easy maintenance, economical and reliable.
6, crushing full-featured, high productivity, small mechanical wear, high overall efficiency.
Crusher works:
Crusher is a use of impact energy to break material of broken machinery. When the machine work, driven by the motor, the high-speed rotation of the rotor, when the material into the zone plate hammer, hammer plate and rotor impact crusher, then crushing device was thrown on the counter-attack again, and from then on the counterattack liner bounced back plate hammer again crushing area, this process is repeated, the material descending into the one, two, three, repeated crushing counterattack chamber until the material is broken to the desired size from the discharge port. Gap adjustment between the impact rack and rotor material change to reach the expected size and shape of the material object.
I produced good quality rotary kiln, cheap, very suitable for medium and small manufacturers use, and that the company also produces a variety of crushing equipment, sand making equipment, such as: jaw crusher, at the international level have a pretty good feedback, I trust oriented. Welcome customers to buy. Website is:HENAN SHIBO
Comments