SUPERPRO-611S High Speed Universal Programmerby Yong Yang China Brand Universal Programmer
The SuperPro-601S is an universal programmer equipped with ARM9 processor with a USB 2.0 interface. SUPERPRO-611S High Speed Universal Programmer Based on the 48-pin ZIF socket it can program over 38000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. An LCD display screen of 20 x 2 characters, as well as a keypad, allow to use this programmer in stand-alone mode. In Stand-Alone mode of the SuperPro-601S, you can download and add numerous algorithms using the optional compact Flash card (512Mb or 1Gb) inserted in the back of the programmer. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages.
The programming is extremely fast based on the the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages.
It allows advanced production functions such as automatic programming as soon as the device is detected, verification of the device ID and automatic generation of serial numbers in the device. Updates can be download freely.
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller
Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more
Computer interface with USB 2.0
Stand-alone feature is supported by Compact Flash Card
AC Power Adapter input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W
Dimensions: 178 x 130 x 40 mm
SUPERPRO-611S is Universal Programmer, High Speed Universal Programmer, USB 2.0 for ARM9 32 bit MCU, EPROMs, Flashs, PLDs
Created on Dec 31st 1969 19:00. Viewed 0 times.
No comment, be the first to comment.