As we all know that the dynamic mounting service is done to provide a completely new look & beauty also to the house & it is very much comfortable also. Nowadays a common man is able to afford such type of services very easily & conveniently also. These services easily enable you to place the television set over the fireplace. So that you can become more able to make your home clean & always decorated also.

Now we will discuss about the fireplace mounting. A fireplace mounting or we can also describe it as the down tv it provides a complete natural look to the house & with the help of this service we were now more able to watch or place television anywhere in the house according to our convenience. So now it becomes a necessary & very important part of the life.

Now we will discuss about certain types of dynamic mounting method. Which were explained as follows-

1. Down and Out Mount
2. Down and Out Swivel Mount
3. Extra Wall Support
4. Center Speaker Bracket

Down and Out Mount-There is a specific manual for the down and out mount type of service. Which are explained as follows-

Fits most 32inch Flat Panel television’s and up, checks your television weight and mounting hole pattern to ensure this mount will work.

Handles LCD and Plasma Flat Panel Televisions 25 to 110 lbs.

VESA compliant: 168 wide x 100 high to 692 wide x 502 high (mm).

Allowable Television mounting pattern: 6.6 (168mm) to 27.2 (691mm) inches wide, up to 19.8in (502mm) high, see figure below.

Product dimensions: 29.0 x 23.6 x 4.4 inches, see figure below.

Down and Out Mount weight: 23 lbs

      Comes with all the hardware needed to attach to 2 wood studs 

Down and Out Swivel Mount-There is also a manual with the help of this we were able to use this service they were same as the down and out mount. Which are to be explained as follows-

Fits most 32inch Flat Panel television’s and up, check your television weight and mounting hole pattern to ensure this mount will work.

Handles LCD and Plasma Flat Panel Televisions 25 to 110 lbs.

VESA compliant: 168 wide x 100 high to 692 wide x 502 high (mm).

Allowable Television mounting pattern: 6.6 (168mm) to 27.2 (691mm) inches wide, up to 19.8in (502mm) high, see figure below.

Product dimensions: 29.0 x 23.6 x 4.7-5.7 inches, see figure below.

Down and Out Mount weight: 29 lbs

Comes with all the hardware needed to attach to 2 wood studs

Extra Wall Support-This facility is mainly used to provide more flexibility to the television set while it is going to be attached with the wall over the fireplace. This facility is used with both types of services.

Center Speaker Bracket-Center Speaker Bracket is made to attach directly to a Dynamic Mount and place a speaker above or below your TV. The Center Speaker Bracket has a lot of adjustability to make it work with most TV and speaker combinations.