EN-71 1998 8.2, I Sharp Edge Tester

by Chloe Leung Testing Machine

Sharp Edge Tester To determine whether accessible edges on toys are likely to cause injury.

Recommended Features

comply with 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.2, ISO 8124
Dimensions: 290x180x115 mm
Weight: 3.3 kg
Accessories charging unit, foot switch, one roll of PTFE tape, base plate

Learn more about EN-71 1998 8.2, I Sharp Edge Tester»

Review on EN-71 1998 8.2, I Sharp Edge Tester

Sharp Edge Tester
Product Information
To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
Dimensions: 290x180x115 mm
Weight: 3.3 kg
Accessories charging unit, foot switch, one roll of PTFE tape, base plate
Testing Standards
Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.2, ISO 8124,

Related to EN-71 1998 8.2, I Sharp Edge Tester

Sharp Edges Testing

Related Resources

16 CFR 1500.49 - Technical requirements for determining a sharp ...

The sharp edge test method prescribed by paragraph (d) of this section will be used by .... The test shall be performed with a sharp edge tester which contains a ...