ecutool 433mhz car remote key scanby Roy L. owner
Fcarobd 1pc global remote control code copy device wireless 433mhz car remote key scanner remote control code cloner Recommended Features
- 433Mhz Remote Control Code Scanner is only for fixed code remote key, not for rolling code remote key.
- 433Mhz Car key remote control Wireless Remote Key/Code Scanner Detect, receive, copy car remote control signals
- 433Mhz Remote Control Code Copier receives the signal sent by the fixed code anti-theft system, save and copy the masters remote control signal
Review on ecutool 433mhz car remote key scanWorking frequency range: 433Mhz
Support code type:
433Mhz Remote Control Code Scanner is only for fixed code remote key, not for rolling code remote key.
433Mhz Car key remote control Wireless Remote Key/Code Scanner Detect, receive, copy car remote control signals, then command the car as freely as the cars owner
433Mhz Remote Control Code Copier receives the signal sent by the fixed code anti-theft system, save and copy the masters remote control signal
The effective distance is 500 metres
Save thirty remote control signals Decodability chip:
PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014
Function 1: (Scan/copy and save) receiption
1. Turn on the power. (the screen Display: Remote control Decode the tool)
2. Press any key on the remote control receiver. (Display the remote control password)
3. By the host of the fifth key to save the password, you can save thirty yards, more than thirty; it will automatically flush the code stored in the beginning.
4. When press the sixth key, there is *, that means the device refuse accept the signal. And press the sixth key again, * disappear, and the device can accept the signal again.
Function 2: Use as a remote control interfere-- transmit power
1. Press The first key and the second key together, display Remote co01001 Decode the too S
2. Then Press the car Remote Control Code Detector key (the fifth key) to call the saved password. What is the sequence you want to send out decided by the times of you press the fifth button (select the password by press the fifth buton times, if you want select the first password ,you need press 1 time fifth button,and if you want select second password ,you need press 2 tmes fifth button,etc..)
3. And then press any key(first~fourth) to launches the password you selected.
If you want to change the launch password, you can set up it though the first four keys. After finished, you can press the fifth key to l
Related to ecutool 433mhz car remote key scan
Created on Sep 30th 2015 02:39. Viewed 534 times.
No comment, be the first to comment.