Affiliates
|
Pig Waterer Bowl
Jan 25 2014 00:51 Piglet Waterer BowlModern pig farms need plenty of drinking water, as during the pig’s growing period, lots of clean drinking water is needed. Pig waterer bowl is one of the necessary facilities in pig farms, as the waterer bowl can provide clean water continuously and save water in a degree. We supply three models of pig drinking bowl ZZW piglet drinking bowl (made of Polypropylene PP), YD pig waterer bowl( made of Stainless steel), CX pig drinking bowl( made of Stainless steel).The Composition of Pig Drinker BowlThe drink bowl often made by plastic or stainless steel. It includes two parts: water cup and spring valve.The working process of Waterer BowlWhen the pig wish to drink, it will push pressing plate, and the plate will drive the outlet valve, so the water will flow to the cup from the pipe. When pig stops drinking, the spring will haul back the valve and stop the water. The Advantages of Piglet Drink Bowl1. The pig can see the water more clearly and drink enough for one time,2. It can save water for more than 30%, and lighten the pressure of sewage discharge and sewage disposal.3. It can avoid the drink scratch the pig and it’s very safe for piglets.4. When medicine added, it can save both water and medicine.5. It has fine sealing performance. When the water flow out, the pressure will drop, so that the flow of the water will also slow down to satisfy pig’s need.6. It has smooth surface and anti-corrosion. It’s easy to clean and avoid the water splashed, which can reduce the humidity of the pig house efficiently. |
|
Duck-billed Pig Drinker
Jan 25 2014 00:35 Introduction to Duck-billed Pig DrinkerDuck-billed pig drinker consists of valve body, valve plug, sealing ring, return spring, corking, sieve, etc. The valve body and valve plug are made of brass and stainless steel, the return spring and corking are made of stainless steel, and the sieve is made of engineering plastics. The overall structure are simple and corrosion-resistant. The Working Process of Duck-billed Pig DrinkerWhen pig wishes to drink, they hold the drinker in its mouth and bite the valve rod to let the water go through the gap of the valve plug and sealing ring. When pig stops biting, the return spring will haul back the valve rod, and the gap is sealed again to stop the water flowing. This kind of drinker has good sealed performance and slow water flowing, convenient for pig to drink.Duck-billed Pig Drinker ApplicationThere’re two kinds of duck-billed drinker, the small one with flow of 2-3L/min, and the big one with flow of 3-4L/min. The small one is suit for piglet, and the big one is suit for fattening pig and adult pig.Pig Drinker InstallationThe angle of installation is 45º or horizontal, and the terrain clearance depends on pig’s weight. The drinker should be installed in defecation area, which is away from pig’s resting area. The pig drinker needs to be checked regularly, clean the dirties, adjust and strength the screws. The component should be changed timely if there’s any malfunction.If you have any question please contact :nicholepandora@gmail.com |
|
Pig Feed Trough
Jan 23 2014 22:13 Pig Feed TroughFeed trough is used to supply fresh feed to sows, piglets and fattening pigs. We have trough for sow, supplementary feeding trough for piglet, trough for fattening pigs and commonly used trough.? Feeding Trough for SowAccording to the feed trough materials, we have stainless steel trough, plastic trough, cast iron trough, etc. It is suitable for pig farrowing crate and sow crate. The trough is often installed under the barrier, convenient to supply feedstock continuously in the corridor.Stainless Steel Feed Trough1. It is well know that the nature of the pig is grubbing. If the trough is too shallow, the feed will easily drop out of the trough, not only making waste, but also polluting the environment. The back of our stainless steel feed trough is 53 cm high, so that it can avoid the feed spilling over efficiently.2. This kind of pig feeding trough is totally made of stainless steel, which is anti-corrosion and will not get rust. It can ensure the cleanness and safety of the feedstock.3. Easy to clean, solid and durable.Plastic Pig Feeding Trough1. Made of thicken engineering plastics and has stainless steel bordure, which is wear-resistant and bite-resistant.2. Has circular arc bottom, and no dead corner when feeding.3. Very light and easy to move.4. Larger feeding space and durable.? Supplementary Feeding Trough for PigletSupplementary feeding is very important during piglet’s growing and the best time to feed is 5-7 days after born. But if the feed trough is not in a reasonable design, the feed can be easily polluted and drenched. What is worse, it also can make the piglets to catch disease of digestive tract . Due to this reason, we designed a new type of piglet feeding trough. This kind of feeder trough is not only economical and practical, but also has better feeding result.The Application of Supplementary Feeding Trough1. This kind of trough often installed on both side of the sow’s crate, and also can be put in use separately. 2. It can be used for supplementary feeding when the lactation yield of the sow begin to decline or during weaning period.? Double-Sided Feeding Trough for Fattening PigsDouble-sided trough is designed for feed fattening pigs. The trough is installed in the twin nursery bed, and it has two sides with multiple positions, which can meet the demands of two group of pigs. The Advantages of Double-side Fattening Pig Feed Trough1. The feed will drop gradually and decrease the waste of feed.2. It is made of anticorrosive material, so that the bottom won’t be corroded by water or other factors.3. The trough adopts durable iron, so it won’t be broken after long time use even in hostile environment.4. Easy to clean and install. |
|