Why My Printer Stops Working?

by Printer Repair Los Printer Repair in Los Angeles Inc.

Printers are great and quite efficient at making our work easier. But sometimes, they suddenly stop working and the work hangs in between. Well there can be many reasons why your printer suddenly stops printing or working, and today we will discuss all of them starting from paper jamming to blocked nozzles and many other issues.

Most of the time the reason is simple as over or under use. In fact, you will be surprise to know that when inkjet printers are not used for over a long period of time then ink might get dried up and block the nozzles.

Is there a need to replace the cartridges?

Printers always warn you before the ink is running out. And, if you print occasionally then there are chances that remaining ink or toner might get dried up.

As soon as you see the message order new cartridges and also don’t install them instantly wait till the colors fade out and after that you have to install them carefully.

Epson printer repair Los Angeles make your cartridges available every month once you pay them in advance and thus, there will be no fuss and you will get everything on time.

Also, when you have something urgent to print, which you can use in black and white format and your colored ink is run out then you can use the printer properties in the control panel and make the necessary changes to print a document in black and white color combination.

Why does my printer say "Error"?

The most common reasons when your printer shows error is related to paper. So, the first step is to check whether the input tray is empty or not. And, if you find one you have to fill the paper tray and remove all the bits and chunks of paper stuck inside the printer.

Also, take out the paper tray and open all the flaps and look inside it. You can also use the torch, to see the paper and use long tweezers to remove the piece of paper stuck in the corners of the printer.

Why is the print quality poor?

Sometimes, it happened in inkjet printers that their nozzles get blocked causing horizontal streaks on prints and printing poor colors as well. Thus, make sure you always keep the print heads clean from time to time. This kind of procedures can vary printer’s models to models and in some of the printers you might get the option on the control panel or in the printer software in the computer.

And, if you couldn’t find a way you might need to look up in the manual. Or it is also possible that you might find a maintenance section in your printer as well.

Solve common printing problems: maintenance

Some of the measures you can take to keep your printer working in good quality are as follows:

Make sure you use good quality printer papers because bad quality papers can be too absorbent and become a blotting paper.

Well, Laser printers are less dependent on paper and if you got smudging, or spots in the same area then there are chances that there is some dirt which you have to clean it carefully using a cotton, dry and soft cloth.

Also, you have to be careful maintaining the imaging drum, using isopropyl alcohol and a soft cloth.

Wrapping Up –

We hope you understand the reasons why printers suddenly stop working or what you have to do when you encounter the above-mentioned problems with your printer. But if you are still confused with your printer problem then you can easily contact the Printer repair service near you for resolving your issues.