Tips on Diesel Generator Transportation and Installation
by Starlight Generator dieselgeneratortechNo matter it is transportation or installation of diesel generator set, you need to pay attention since it is electric equipment. In this post, you will learn the detailed information.
Transportation of diesel
generator set
The foundation of diesel generator set is
designed especially for the convenient transportation. Incorrect transportation
will cause serious damage to the components of the set. Forklift can be
applied for lifting the electric generating set or push or pull the set by
putting forth effort on the underframe. If push, do not use fork push machine
directly but shall put some wood between the fork and generator bracket for
preventing damage to the generator bracket and weight disperse. If the electric
generating set needs to be moved frequently, “oil-filled slide” can be
installed on the generator bracket which will provide the forklift with groove
and suspension. Small types are already equipped with groove for forklift on
the underframe.
It is forbidden to lift the
electric generating set by the rings of engine or alternator.
Examine whether the lifting
device and supporting are in good condition and whether the load capacity of
hanging equipment is appropriate.
Nobody is allowed to stand
near when the machine is lifted up. If want to lift up the electric
generating set, it shall install a single-point suspension apparatus
which is already equipped by the standard machine with canopy. If lift up the
electric generating set for the purpose of installation, the lifting eyes on
the underframe are designed for hoisting the set. After finishing the
connection, check whether it is hung tightly, whether there’s any split on the
weld, whether the screws are screwed tightly, etc. A crossbar is needed to
prevent the damage to the machine. Make sure that the suspension shall lie in
the center of gravity (near to the generator) rather than the center of the
whole machine, so that the whole machine can be lifted up. Guard rope is
required to prevent the sire cable from twist together or prevent the machine
from swing once the machine left the ground. It is better not to lift up the
machine in strong wind. The machine shall be put on flat place where can bear
the set weight when laying down the machine.
4.4
Installation position
It is critical important to
choose a good place for installation of electric generating set among
all steps. The following factors are critical for selecting
the site for installation.
Sufficient ventilation.
Protect the components from
rain, snow, hailstone, flood, direct sunlight, freezing temperature or Do not
expose the machine in the polluted air, such as grinding dust, metal dust,
fiber tow, smoke, lampblack, vapor, acid, alkaline and corrosive gas, smog discharged
by the engine, or other pollutions.
Do not install the electric
generating set on a place where trees and electric poles fall down or place
where can be pressed by the materials from the cars and hoists.
A certain space must be left
surround the generator for the purpose of cooling and convenient maintenance.
It is not allowed to put other material at least one meter away from the set
and 2 meters above the set.
A passage for the whole set
to the installation room must be left and pipe for air passage shall be easy
for assemble and unassembled, serving as convenient carrying port.
Non-management staff are forbidden to enter into the generator room If it is necessary to install the electric generating set outside the building, it needs to be equipped with weather proof casing or container type casing, which is of significant importance to the electric generating set that needs to be installed inside or outside the building temporarily.
Contact us at: sales@dieselgeneratortech.com
Sponsor Ads
Created on Apr 26th 2018 22:43. Viewed 280 times.