Tips for cleaning roof shingles with a pressure washer

It is generally not recommended to pressure wash roof shingles for removing ordinary dirt, debris or leaves. It can possibly harm the shingle’s coating of protective girt. A light sweeping or a wash with a garden hose can help you in removing the dirt, debris, or leaves. But if the roofs have algae, mold, moss, or stubborn stains, your choice is to apply mechanical force like pressure washing. By reading the tips mentioned below, you will find cleaning roof shingles with a pressure washer is not only safe but possible too.  The below-mentioned tips will help you get rid of algae and moss much quicker.

Avoid using the pressure washer at its highest setting

Even though using the equipment at its highest setting will help you blast away moss and algae at a much faster rate, you will also end up blasting or damaging away the shingles away. Using the pressure washer at a low setting will help you clean without destroying your roof shingles. This is what experts providing soft wash roof washing services have to say.

Use the equipment at the right angle

You should always use the washer at the right angle so that water runs downward properly towards the edge of the roof.  The power can send water up under the roof shingles if not pointed downwards. This can cause your roof to leak.

Avoid doing the work while standing on the ladder

The pressure pumping through the wand may overbalance you. And, you may end up falling if you are not careful. So, avoid doing the work while standing on the ladder.

If you are not completely sure you can clean roof shingles using a pressure washer, seek the help of a professional company that has expertise in using cleaning equipment, including a commercial power washer.  They will come to your place and do the job professionally.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Feb 12th 2020 07:19. Viewed 388 times.

Share on APSense

Comments