The purpose of the elbow with the installation By yaang.com

by yane Yang Sales Manager

Elbow use and installation purposes: elbow for the connection of the pipe bend. Connect two pipes with the same nominal diameter, and make the pipe to make the angle turn. Material division of carbon steel elbow, cast steel elbow, alloy steel elbow, stainless steel elbow, copper elbow, aluminum alloy elbow, etc.. Elbow can be said to cover the use of all walks of life, small to large household enterprises. Each elbow has its own advantages and uses, sincerely welcome new and old friends to come to buy.
Elbow is commonly used in pipe installation of a connecting pipe, for the connection of the pipe bend. Other names: 90 degree elbow, right angle bend, love and bending, etc..

Wear-resistant elbow can be favored by the market and continue to replace some of the traditional wear-resistant materials, the root cause lies in its excellent product quality, as well as in the traditional wear-resistant materials and materials. In order to obtain the performance influence of the upstream elbow on the performance of the inner cone flowmeter and the length of the shortest straight pipe, the numerical simulation of the 90 mm diameter and equivalent diameter ratio 0.45/0.65/0.85 was carried out. Simulation medium is often warm water, Reynolds number range: 0.498 * 105 ~ 4.98 * 105, the research program is divided into two types of the baseline and the upper reaches of the single 90 degree elbow, a total of 15 groups. Based on the relative error of the average outflow coefficient and the main evaluation criteria of the installation condition, the length of a straight pipe with a single 90 degree elbow is presented and compared with the foreign research results.

Source: Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com)