The eminence of tablet metal detectorby Sanjeev Yadav SEO Consultant
Pharmaceutical metal detector is a digital eddy current based on metal detection system designed for the pharmaceutical industry for the detection of metal contamination in tablets / capsules installed preferably after powder. It can also be used in the confectionery industry for the detection of metal contamination in candies. The system is designed and manufactured to meet the stringent requirements and hygiene standards of the pharmaceutical industry.
Combo dust eliminator + metal detector is composed of vertical integrated lower and upper dust remover with digital Tablet Metal Detector. The dust eliminator is provided with frequency and voltage (Power) Control ensuring effective dedusting and deburring.
All the elimination of configuration is controlled from the metal detector. The input can be rotated ° and therefore the same can be used for the right of the left compressive output of the machine conveniently. Currently, improving public health involves meeting certain specifications, tolerances and procedures that ensure the quality of the drugs used in the country.
A very common problem within the pharmaceutical industry is the presence of metals in the capsules, dragees, tablets or tablets at the time of its manufacture. The metal that is usually found is stainless steel, because the tablets pass through meshes or because at the time of sieving or a small rub, the tablet is contaminated.
To detect this type of impurities a tablet metal detector is used: completely reliable equipment, capable of detecting not only stainless steel, but also carbon steel, bronze and aluminium, among others. This equipment is a detector of metal particles that can be contained in a capsule, tablet or tablet, detecting it immediately.
Its operation is very simple, as after the tablets pass through the encapsulator arrive at the detector, machine that performs the detection by means of photocells and that is programmed to detect any metal to the amount that marks the Pharmacopoeia of the United States.
The equipment makes the detection of the different metals in a sensitivity of the following diameter:
- Ferrous steel from 0.3 to 0.5 microns
- Non-ferrous metals from 0.5 to 0.7 microns
- Stainless steel from 0.8 to 1.2 microns
Tablets that have a certain metal content are rejected by sending them to a second compartment and passing through those in which no metal was recorded.
The method of operation is electronic. Its size is approximately 1.20 m high, base 0.60-0.70 m and its weight is about 20-25 kg.
Tablet metal detector is committed to offer you a great variety of equipment and machinery of the highest quality and technology in the best conditions of use and especially of price, puts at your disposal this new equipment delivering it in perfect conditions and receiving additional advice for its use and management, in addition to providing maintenance and technical advice at any time you need it.
Having a highly trained technical staff to perform the perfect installation of the equipment, an online training is offered to guarantee operators trained in the perfect functioning of the equipment, as well as answering all the doubts and comments about the operation of the same.
Created on Jun 24th 2019 03:40. Viewed 233 times.
No comment, be the first to comment.