The application of industrial endoscope in the failure of high-precision lathe equipment!

Industrial endoscope technology has unique advantages. It can extend people's sight distance, and can change the direction of sight at will, and accurately observe the true condition of the inner surface of the object, which cannot be replaced by other inspection instruments. Whether in the manufacturing industry or the maintenance industry, the use of endoscopes for NDT detection has achieved good results, solved many difficult problems, ensured the normal operation of the entire equipment, and avoided some accidents. Now let's take a look at how industrial endoscopes diagnose high-precision CNC lathe equipment.

After the equipment is used for a long time, its spindle system often fails. The spindle occasionally screams when processing parts. The frequency of failures becomes more and more frequent with the use of the equipment, and finally develops into the spindle stuck, causing the equipment Does not work properly. When abnormal noise occurred in the early stage of the equipment, the maintenance department inspected and repaired the equipment. During the inspection, it was found that the spindle was rotating normally when the equipment was not clamping the workpiece. It was preliminarily inferred that there was a problem with the vacuum fixture system of the equipment. However, because the equipment manufacturer requires the user not to disassemble the equipment spindle by himself, it is impossible to see the specific situation occurring inside the equipment failure point using conventional diagnostic methods, and it has been unable to thoroughly check the equipment failure, resulting in the equipment failure cannot be eliminated. In order to solve this problem, the factory purchased the Jietai industrial endoscope, and the image collected by the industrial endoscope probe was transmitted to the TV monitor for display. Without disassembling the equipment, the fault point Internal observation and judgment greatly improve the identification rate and reliability of equipment failures. At the same time, guide the troubleshooting operation on the TV image of the industrial endoscope, and successfully complete the troubleshooting of the equipment.

Jietai industrial endoscope adopts domestic advanced production and manufacturing technology to create industrial endoscope products with clear images, stable performance, lightweight and portable, and simple operation. It is your best choice. Welcome your inquiries. 

More industrial endoscope information at industrialendoscope.com

Report this Page