The amazing service of fabricating PCC pipes in Jhansi

by Sanjeev Yadav SEO Consultant

Fabricating pre-stressed concrete cylinder pipes are specially prepared pipes consisting of a tough concrete core, a steel cylinder and highly tensile wires with a proper mortar coating. The core is basically the main structure which bears the load. It is the load bearing component having a steel cylinder which acts as a barrier of waste between the various layers of concrete. The tensile wires produce a proper and uniform pressure with compression to the core. The mortar coating present on the pipes protects the pipe and the underlying wires from all types of physical damages and corrosion.

Evolution of the PCC Pipes
The PCC Pipes was introduced to the market back in the year 1942 as the lined cylindrical pipes. The pre-stressed wire present in this type of cylindrical pipe found in a wrapped state. The wire is wrapped around the steel cylinder for providing constant pressure on the core. The second order of these PCC pipes came up in the year 1952. It had concrete encasement of steel on both sides of the pipe. It was known as the embedded cylinder pipe. The major point of difference between these embedded and lined cylindrical pipes on the basis of the way how concrete core is encapsulated. The general diameter of both these types of pipe ranged between sixteen to sixty inches in width and thirty to two fifty-six inches in length. The basic design and the standards of manufacturing these pipes have undergone gradual but remarkable change since the year 1942. The standard has got revised a number of times until the final and modern version of. These PCC pipes came up. The initial structure of this PCC is made in order to conserve things considering the various factors of safety. With major revisions in the standard and rapid change in the design, quality and thickness of the different layers have made these PCC pipes fabrication services in Jhansi a major success.

Reasons for the use of PCC pipes
There are a number of reasons why these pipes are widely used. Some of the remarkable features are:
• It is resistant to all types of physical damages and unwanted corrosion.
• It can be easily installed without requiring too much time as well as money.
• The use of steel and mortar helps in making these pipes resistant to corrosion, thus, making it durable for a longer time.
• It can resist the pressure caused by internal sources and even is suitable for external loading easily.
• A wide range of pipe with different diameters are available in the market for varied needs and budgets.
• It is comparatively more economical than getting a properly lined pipe made up with coated ferrous.

These were a few reasons which these PCC pipelines have earned huge popularity in the pipe industry providing the service of fabricating PCC pipes in Bijauli. They are a great pipe system for both drainage and water supply it has great strength and is corrosion free. These pipes are worth the amount you spent.