Steps to Successfully Install Solar Panels and Systems

by Jeffery Orozco We provides the Solar System from Solarzing.

Solar systems comprise solar panels, solar inverter with computerized controller and a mounting system. Solar panels generate Direct Current electricity from the sunlight. Following the generation, the inverter concerts the produced electricity into Alternating Current, hence it could be utilized in the households and other settings. The computerized controller happens to manage solar system, while ensuring optimal performance. If you look for off-grid solar system, or battery backup system, you will need a battery.

Solar system installation process –

If you have been wondering about where you should install the solar panels, the common place to install solar panels is roof. Majority of roofs usually have the chosen specifications for the installation, hence panels receive the maximum sunlight. However, if you are not comfortable with roof installation, you can also choose to mount the panels on ground. You will, then need to ensure that there are objects blocking the sunlight from reaching the panels.

Below are the steps to successfully install solar panels –

Set up the scaffolding

Start by erecting the scaffolding. It will ensure safety during the entire installation process when you will be on roof, working.

Be done with panel mounting

Following the scaffolding setup, solar panel mounting systems needs to be set up. This is to support the infrastructure of solar panels. The entire mounting assembly should be titled and hold an angle between 18-36 degrees to get the maximum sunlight exposure.

Install the panels

Once your raise the mounts, solar panels need to be installed right on the mounting structure. Be sure to squeeze all the bolts and nuts tight so the mount stays stable.

Wire the solar panels

Following the solar panel installation, you will install electrical wiring. In majority cases, homeowners use MC4 connectors because they suit all types of solar panels well. Be sure to shut off your household electricity supply when installing the wiring.

Install solar inverter

The solar inverter needs to remain connected to the solar system. Solar inverter us usually installed near the main panels and it can also be both outdoors and indoors. Solar inverters prove to be more efficient if placed in a cooler place. In case your inverter is outdoors, it must not come in contact with afternoon sun. If it’s indoors, the utility room or garage are typically the most common preferences, since these places stay cool for year round and they have ventilation system.

Link up solar battery and solar inverter

After that, the inverter needs to be linked to the solar battery. The solar battery storage could save you the worry of lacking usable energy when it’s a cloudy day outside. This could also reduce the solar battery storage cost at the time of installation.

Link the inverter to the consumer unit

The solar inverter must remain linked to the consumer unit in order to produce electricity. You will also need to connect a generation meter in order to keep an eye on the amount of electricity the panels are actually producing. If you are using Tesla solar battery system, you can use Tesla app for checking the system system’s performance.

Start to test the solar panels

 Now that you have successfully completed the aforementioned steps, it’s time to switch the power on and test the panel system. Once you are satisfied, it’s done and tested.

Looking to buy solar system, shop from Solarzing – one of the most reputable solar system and panels suppliers online.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on May 24th 2021 09:14. Viewed 282 times.

Comments