Safety Measures To Be Followed While Using Multimetersby Mog Lix Shop Online for Industrial Tools, Safety Equipment
A digital multimeter is a tool used for testing and measuring electrical current, voltage and resistance in their respective units. Voltage is measured in volts, current in ampere and resistance in ohms. Digital multimeters replaced needle-based analogue meters owing to their ability to measure with more accuracy and reliability. Thus, it is advisable to buy multimeters in the digital format in the current scenario.
The key highlight of digital multimeters is that they combine the testing capabilities of single-task meters the voltmeter, ammeter and ohmmeter. They also include a number of additional specialized features or advanced options.
Components of face of a digital multimeter:
- Display: Screen to view measurement readouts.
- Buttons: These enable to select various functions and may vary according to the model.
- Dial (or rotary switch): They enable to select primary measurement values as required. It can be either volts, ohms or amperes.
- Input jacks: Where test leads are inserted.
However, just like all other testing equipments, digital multimeter need to be maintained properly for getting accurate and precise results and to maintain accuracy, efficiency and reliability. When you buy multimeters online, you can always refer to the guides provided online.
Safety measures to be followed while using or buying multimeters are:
- Read the user manual properly before making use of digital multimeters. Refer to the Do’s and Don’ts and adhere to the manual for any doubts. You can also contact the customer care if you are using the product for the first time. To ensure ultimate safety, you should read the safety warnings page thoroughly to steer clear of accidents like fire, electrical shock, etc. It is advised that you use multimeters or any other testing equipment on an appropriate power supply and voltage rating as mentioned in the instruction manual.
- Make a note of all the warning instruction and avoid doing all of them to ensure safety while dealing with the multimeter.
- Before you start operating digital multimeters, it is pertinent that such electrical equipment for any measurements is in good working condition. If there exists any abnormality like broken test leads, or cracked cases etc. it is advisable not to use it as it may lead to extreme results.
- Go through quality assurance, specifications, safety protocol, warranty procedure and other ancillary details while buying multimeter online.
- Avoid exposure of digital multimeters to extreme climatic conditions like sunlight, heat or moisture. This may make them dysfunctional or damage them irreparably if put in extreme climatic conditions.
- While measuring voltage with digital multimeters, it is important for you to not use them to measure voltages, that exceed their maximum allowable input value.
- You should never touch any exposed wire, connections or any live circuit when taking measurements with these multimeters. You should keep fingers behind the probe barriers while using digital multimeters or follow instructions as provided in guide or manual when you buy multimeter online.
To ensure that any electrical equipment works to the best of its ability and assurance without damaging your property or harming your well-being, it is important to follow all safety protocols. You can refer to the safety guides online if you buy multimeters online with a click of a button. You can visit Moglix to have a quality assured experience and get the products delivered at your doorstep.
Created on Aug 30th 2018 05:52. Viewed 2,213 times.
No comment, be the first to comment.